Description: Features: with other HAT shield Support boot from the NVMe drive 30mm length Flat Flex Cable Supports installation of official active coolers Dual LED Indicators: “PWR” and “ACT” Supports 2230/2242 NVME M2 SSD only 40-Pin Raspberry Pi HAT Connector Support M.2 Standard-Compliant Power System Gettingstarted Firmware Make sure your Raspberry Pi 5 firmware is up to date with the 2023-12-06 or later version. Software update on the RPi OS should do this for you, but you canforce it by running sudorpi-eeprom-update in the Terminal. If you have updated your firmware and want to boot from the NVMe drive, you might have to get technical and run sudo rpi-eeprom-config --edit from the Terminal and change the BOOT_ORDER to be 0x416 instead of 0x41. To enable experimental and not-officially-supported PCIe 3 mode, add the lineto the [all] section at the end of your Raspberry Pi /boot/config.txt file like this: # Enable the PCIe external connector dtparam=pciex1 # Force Gen 3.0speeds dtparam=pciex1_gen=3 Bootingfrom NVMe If you want to boot from the NVMe drive these extra steps: Format the drive using Raspberry Pi Imager Shutdown Remove your microSD card Power back on Notes Always power off your RPi and disconnect the power supply before installing or uninstalling the NVPI5-2242T and NVPI5-2280B; NVPI5-2242T and NVPI5-2280B offers a general purpose PCIe x1 connection; We do not recommend WD Green SSDs at this time. Drives such as the SN350 are temperamental with the CM4 and RPi 5. 【Compatibility】Dedicated to the latest single-board computer the Raspberry Pi 5, with Raspberry Pi 5 8GB / 4GB / 2GB / 1GB . 【Easy and Quick M.2 Disk Installation】Support M.2 KEY-M NVMe SSD 2230/2242 length , quick installation of M.2 disks in 2230 or 2242 format. 【Dual LED Indicators】Features 2 LED lights for power supply voltage (“PWR”) and M.2 disk activity (“ACT”). 【Stackable Design】Supports the standard 40-pin Raspberry Pi HAT connector,allows for further connection of additional HAT boards in a stack. 【Packing List】1 x NVPI5-2242T board,2 x PCIe FFC cable (30mm length),2 x PCIe FFC cable (60mm length),4 x M2.5x14mm F/F Spacers,4 x M2.5x6+6mm F/M Spacers,1x 40-pin male-female HAT connector，1x Screws Pack Accessories.
Price: 19.52 USD
Location: Terre Haute, Indiana
End Time: 2024-12-04T08:05:26.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Color: 2242T
Size: 2242T
Package Dimensions LxWxH: 6.93x4.21x0.51 Inches
Weight: 0.22 Pounds
Type: Does not apply
Brand: SZSEVSIOT
