Norman 42100T-4CC Stainless 6000 PSI 100 Micron In-Line Filter 1/4" Compression

Description: Norman 42100T-4CC 316-Stainless 6000 PSI 100 Micron In-Line Filter 1/4" Compression Ends NEW!! ********************************************* FREE SHIPPING!! ****************************************** New in the manufactures sealed packaging (plastic bag). This is a stainless steel in-line filter with 1/4" compression fittings for both the inlet and outlet. There is an arrow on the fitting to show which way the flow goes. The fitting is stamped with 316 for the stainless designation. The filter is 100 micron and the fitting is rated to 6000 PSI with a 50 PSID filter collapse pressure (see pictures for technical sheet). The filter is pleated for more dirty holding capacity and a lower pressure drop. This listing is for ONE (1) Norman 42100T-4CC Stainless 6000 PSI 100 Micron In-Line Filter 1/4" Compression. Thanks for looking!! From the manufacturer: Norman's 4200 series mini inline filters are lightweight & designed for low flow, high-pressure point of use applications seen in the aerospace industry. Norman 4200 Series 6000 psi In-Line Recleanable Stainless Steel Filters Norman 4200 Series In-Line Filters provide a compact lightweight In-Line filter for reliable economic protection of critical components. FEATURES: • POSITIVE PROTECTION – 304 Stainless Steel “Microweave” filter element has controlled pore size for precise contaminant removal from 2 to 200 microns. The 316 Sintered Stainless Steel Media can remove particles down to .5 micron absolute. • EXTENDED SERVICE LIFE – The pleated 304 Stainless Steel element design has much greater surface area and dirt holding capacity than simple flat discs. • CHOICE OF END FITTINGS – “Mix-and-Match” male and female connections – pipe thread, flared tube, compression fitting and SAE O-Ring – to adapt to your installation. • EXCELLENT TEMPERATURE AND CORROSION RESISTANCE – All stainless steel construction is suitable for virtually any fluid at temperatures of -320˚ F to + 800˚ F. (6000 psi rating at 70˚ F.) • NO MEDIA MIGRATION – Unlike felt media, the continuous strands of high-strength stainless steel wire mesh are welded to the housing to prevent downstream contaminationProtection – Wire mesh, porous sintered media or random metal fiber options are available in sizes ranging from 0.5 to 200 microns giving you a wide variety of options to suit your needs.Service Life - All wire mesh and RMF options are pleated creating larger surface area and dirt holding capacity vs simple flat discs.Connections – “Mix-and-Match” male and female connections – pipe thread, flared tube, compression fitting and SAE O-Ring – to adapt to your installation.Construction - All welded construction offers outstanding working temperatures (-320˚ F to + 800˚), and no leakage.ASME Section 8/B31.3 compliant design with full penetration weld.Excellent performance in high temperature applications do to all welded design (no elastomer seals).PROTECTION FOR: • Hydraulic Systems • Pilot Circuits • Gauges • Meters • Transducers • Relief Valves • Chemical Procession • Water Filtration • Pneumatic Lines • Test Stands • Laboratories • Cryogenics4200 Series Inline Filter Materials304/304L stainless steel (standard)316/316L S.S. These fittings are marked as 316 Stainless on the Swagelok fitting which is integral to this filter. Housing Material/Pressure Ratings304 and 316(6000 psi) Port TypesNPT, SAE ORB, Flared, Compression, Face Seal Port Sizes1/8" - 1/4" Pipe1/8" - 3/8" Tube1/4" - 3/8" Compression9/16" Face Seal Element TypesWire Mesh, Porous SinteredRandom Metal Fiber (available upon request) Element Materials304 and 316 CRES Micron Rating.2 - 200 micron*Element Dependent Typical Flow Rate5 GPM / 150 SCFM Accessories/Add OnsLock Wire Holes 1. MATERIAL:FITTING: 304/304L STANDARD; 316/316L WHEN -316 IS ADDED TO END OF P.N.DISC: 316/316L STANDARD; 304L WHEN SPECIFIED. SEE ROUTER FOR PARTMAKEUP.DISC WIRE SCREEN MAKE UP PER DEN02-04.2. ASSEMBLE PER OPMF-02.33. DESIGN: PER B31.3 CRITERIA; MIN WALL THICKNESS SEE SHEET 34. WELD AS FOLLOWS:1" HEX: WELD PER BW-100-AUTO-1 OR BW-1001 3/4" HEX: WELD PER BW-100-AUTO-1.75 OR BW-1005. ANNEAL PER DPU01-01 PROCESS NUMBER 19004-60 UNLESS OTHERWISESPECIFIED ON PURCHASE ORDER.6. WORKSMANSHIP PER DMF01-24:PARTS TO BE FREE OF GOUGES, DINGS, AND DENTS VISABLE TO THE UNAIDEDEYE.WHEN THE PART CONTAINS A CONICAL SEALING SURFACE, THE SURFACE MUSTBE FREE OF FLAWS, NICKS AND CHATTER MARKS WHEN VIEWED UNDER AMPLELIGHTING WITH THE UNAIDED EYE. SURFACE BURNISHING IS PERMITTABLE PRIORTO SHIPPING.7. OPERATING AND COLLAPSE PRESSURE (FOR ENGINEERING REFERENCE ONLY)1.00 INCH HEX = 6000 PSI - COLLAPSE PRESSURE 50 PSID8. MICRON RATINGSEE TABLE 1 FOR MICRON CODE.ASSEMBLIES TO BE BUBBLE POINT TESTED PER OPMF-639. CLEANINGCLEAN ASSEMBLY PRE AND POST ANNEALING PER OPMF-500.10. END FITTING SIZE AND TYPESSEE TABLE 2 FOR FITTING SIZE AND TABLE 3 FOR FITTING TYPE11. PART MARKING:MARK PER OPMF-126 "NFC PART MARKING GUIDELINES"12. FOR 1.75" OD USE FDS-1.75-2000FOR 1.00" OD USE FDS-1-2000SEE PAGE 5 FOR EXAMPLES13. PRODUCT NUMBERING42XXT- B C C FOR IDENTICAL END FITTINGS42XXT- B C - B C FOR DIFFERENT END FITTINGS42XXT- B C - D FOR ACCESSORY OPTIONSWHERE,XX STANDS FOR MICRON CODEB STANDS FOR FITTING SIZEC STANDS FOR FITTING TYPED STANDS FOR ACCESSORY OPTION

Price: 35 USD

Location: Chardon, Ohio

End Time: 2025-01-16T13:44:05.000Z

Shipping Cost: 0 USD