N300 AC1200 AX3000 WiFi 6 Outdoor Wireless Access Point Dual Band PoE Powered

Description: N300 Outdoor AP Features - Easy installation, flexible placement - Supports AP, Router, Range Extender and AP+Repeater modes - Robust weatherproof enclosure design, 15KV ESD and 6KV Lightning Protection - Complies with IEEE 802.11 b/g/n standards, wireless speed up to 300Mbps - 2x 7dBi high-gain antennas - Supports WPA/WPA2 (TKIP/AES) Encryption modes - Features 6 LED status indicators Specification 1.Model: WL-WN570HN2-B 2.Ports: 1 x WAN/LAN 100Mbps 3.Button: 1 x Reset(8s); Status LED: 1 x Power, 1xWAN/LAN, 1 x WiFi , 3 x Signal 4.Power Supply: DC 54V/0.3A Power over Ethernet(Passive), DC 48V Power over Ethernet(Active) 5.Wireless Standard: IEEE 802.11 b/g/n 6.Frequency Band/Speed: 2.4GHz(300Mbps) 7.Antenna: 2 x 7dBi Omni Directional Antennas 8.Wireless Security: WPA-PSK/WPA2-PSK encryption 9.Unit Size(without antennas): 18cm x 5cm x 5cm/ 7.1in x 2in x 2in (L x W x H ); Antenna Length: 25cm/9.8in 10.Ethernet Cable Length: 100cm/39.4in 11.Power Adapter Cable Length: 120cm/47in 12.Operating Temperature: -10°C~50°C(-14°F~122°F) 13.Storage Temperature: -30°C~70°C(-22°F~158°F) 14.Distance:Outdoor 150m(Change with the Actual Environment) In the Box 1x N300 Outdoor Access Point 2x 7dBi High-gain Antennas 1x RJ-45 Ethernet Cable 1x Power Adapter 1x PoE Converter 1x Main Body Holder 2x Cable Ties 1x Screw Fitting Kit 1x Quick Start Guide Warm Tips 1.The PoE converter is not waterproof, please install it indoors. 2.Please make sure your Ethernet cable to the outdoor router is CAT5E or above certified and shorter than 100m/328ft. 3.Please install the product 2-3 meters above the ground for better performance. How to Install Antennas and Ethernet Cable? 1) Pass the RJ45 cable through the spiral cover. 2) Pass the RJ45 cable through the rubber seal. 3) Pass the RJ45 cable through the holder. 4) Connect the RJ45 cable to the RJ45 port. 5) Spin the 2.4G antenna into the 2.4G external RP-SMA connector. 6) Tighten to secure the holder. 7) Insert the rubber seal into the holder. 8) Secure the spiral cover by screwing it on. Note: The PoE converter is not waterproof, please install it indoors. Please make sure your Ethernet cable is CAT5E or above certified and shorter than 100m/328ft. Installation Steps for the Device 1) Fasten the main body holder. 2) Plug the device into the holder. 3) Connect one end of an Ethernet cable to the "PoE" port of the PoE converter. 4) Connect one end of another Ethernet cable to the "LAN DATA IN" port of the PoE converter, and connect the other end to a "LAN" port of your router. 5) Plug the Power Adapter into the power outlet. 6) Push the "ON/OFF" button on the PoE converter to power on. AC1200 Outdoor AP Features - Complies with IEEE 802.11 a/b/g/n/ac standards. - Simultaneous Dual Band 300Mbps@2.4GHz+867Mbps@5GHz. - Easy installation, flexible placement. - Supports 802.3AT/AF POE and Passive PoE to supply power. - Supports Router, AP, Repeater modes. - Support FIT AP with WAVLINK AC manager. - Supports 128 bit WPA/WPA2(TKIP AES ) - Features 2 x RP-SMA connectors for external antennas. - Robust weatherproof enclosure design. - 15KV ESD and 4KV Lightning Protection. - Features 6 x status LED indicators. Specification 1.Model: WL-WN570HA2 2.Ports: 1 x WAN/LAN 100Mbps 3.Button: 1 x Reset(8s); Status LED: 1 x Power, 1xWAN/LAN, 1 x WiFi , 3 x Signal 4.Power Supply: DC 54V/0.3A Power over Ethernet(Passive), DC 48V Power over Ethernet(Active) 5.Wireless Standard: IEEE 802.11 a/b/g/n/ac 6.Frequency Band/Speed: 2.4GHz(300Mbps), 5GHz(867Mbps) 7.Antenna: 2 x 7dBi Omni Directional Antennas 8.Wireless Security: WPA-PSK/WPA2-PSK encryption 9.Unit Size(without antennas): 18cm x 5cm x 5cm/ 7.1in x 2in x 2in (L x W x H ); Antenna Length: 25cm/9.8in 10.Ethernet Cable Length: 100cm/39.4in 11.Power Adapter Cable Length: 120cm/47in 12.Operating Temperature: -10°C~50°C(-14°F~122°F) 13.Storage Temperature: -30°C~70°C(-22°F~158°F) 14.Distance:Outdoor 200m(Change with the Actual Environment) In the Box 1x AC1200 Dual Band Access Point 2x 7dBi High-gain Antennas 1x RJ-45 Ethernet Cable 1x Power Adapter 1x PoE Converter 1x Main Body Holder 2x Cable Ties 1x Screw Fitting Kit 1x Quick Start Guide Warm Tips 1.The PoE converter is not waterproof, please install it indoors. 2.Please make sure your Ethernet cable to the outdoor router is CAT5E or above certified and shorter than 100m/328ft. 3.Please install the product 2-3 meters above the ground for better performance. AX3000 WiFi6 Outdoor AP Features - Supports for dual band (2.4G 573Mbps+ 5G 2402Mbps) with the aggregated speeds up to 3000Mbps. - Supports one WAN/LAN Ethernet Gigabit port. - Complies with IEEE 802.1 ax/ac/n/g/a/b standards. - Supports Router/AP/Range Extender/Mesh Router/Mesh Extender mode. - Encryption type: OPEN,WPA2-PSK,WPA3/WPA2 MIX. - Seamless and stable WiFi Mesh makes you enioy seamless roaming throughout the house with a single network name and password. - Robust weatherproof case and IP67 waterproof grade withstand harsh outdoor conditions. - Supports 802.3 AT/AF Active PoE and Passive PoE to supply power. - Supports Fat AP Mode. - Supports Fit AP Mode with WAVLINK AC controller. Specification - Model: WL-WN573HP3 - Product Size: 24x24x7cm/9.4x9.4x2.8in - PoE Converter Size: 4.4x3.7x2.2cm/1.7x1.5x0.9in - Length: Ethernet Cable - 100cm/39.4in; Power Adapter Cable - 130cm/51.2in - Product Weight: 1050g/37oz - Standard: IEEE 802.11 ax/ac/a/n/g/b - Frequency Band/Speed: 2.4GHz(573Mbps)+5GHz(2402Mbps) - Wireless Security: WPA2-PSK, WPA2/WPA3-MIX - Antennas: 4 x 12dBi Directional Antennas - PAIR/RESET LED: Blue - PoE Converter Status LED: Green In the Box - 1 × AX3000 WiFi 6 Outdoor Access Point - 1 × 54V Power Adapter - 4 × Cable Ties - 1 × PoE Converter - 2 × Silicone Pads - 1 × Ethernet Cable - 1 × Main Body Holder - 1 × PWM M4×8×8MM Screw - 1 × Wrench - 6 × KA M4×25×6MM Screws - 1 × Quick Start Guide - 6 × Φ8x25MM Screw Plugs Warm Tips ①The PoE converter is not waterproof, please install it indoors. ②Please make sure your Ethernet cable is CAT5E or above certified and shorter than 100m/328ft. ③Please install the product 2-3 meters above the ground for better performance. ④Under the mesh mode, WN573HP3 supports interconnection with WN586X3, WN583AX3 and WN573HX3. ⑤The real performance of the product may vary in accordance with different environmental conditions. How to install the Ethernet cable? ①Pass the RJ45 cable through the waterproof connector cover. ②Screw the waterproof seal into the waterproof connector bracket. ③Pass the RJ45 cable through the waterproof connector bracket, and screw the waterproof connector bracket into the cover. ④Put the waterproof sealing ring on the waterproof connector bracket. ⑤Connect the RJ45 cable to WAN/LAN port. Note: The PoE converter is not waterproof, please install it indoors. Please make sure your Ethernet cable is CAT5E or above certified and shorter than 100m/328ft. How to install the product on a column? ①Stick two silicone pads on the bracket and post respectively. ②Thread the cable ties through the fixing point of the bracket. ③Fix the product to the post with cable ties.

Price: 40 USD

Location: Los Angeles, California

End Time: 2024-11-24T09:22:48.000Z

Shipping Cost: 0 USD

Product Images

N300 AC1200 AX3000 WiFi 6 Outdoor Wireless Access Point Dual Band PoE Powered

Item Specifics

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

Brand: WAVLINK

Type: Access Point

Number of LAN Ports: 1

Maximum Wireless Data Rate: 3000 Mbps

Features: Dual-Band, For Gaming, MU-MIMO, IP67 Weatherproof, Multi-modes, Long Range

Color: White

Maximum LAN Data Rate: 1000 Mbps

MPN: Outdoor AP

Unit Quantity: 1PC

Unit Type: Unit

Connectivity: Wireless-Wi-Fi 802.11a, Wireless-Wi-Fi 802.11ac, Wireless-Wi-Fi 802.11b, Wireless-Wi-Fi 802.11g, Wireless-Wi-Fi 802.11n, Wireless-Wi-Fi 802.11ax

To Fit: Audio Receivers, Car Auxiliary, iPod, PC, PS4, Television Set

Ports: Ethernet (RJ-45)

Manufacturer Warranty: 1 Year