Description: This CNC machined aluminum two piece mount is designed to adapt a large range of outrunner motors to the new Multiplex Easy Star 2. It will allow for three different motor mounting heights to accommodate propeller sizes ranging from 7" to 9".With this feature you can easily run a lower KV motor with a larger propeller for more thrust and better efficiency. This would be a perfect combination for FPV pilots looking for longer flight times and a more quiet platform.Swapping motors from a 35mm outrunner with a 9" prop to a 28mm outrunner with a 7" prop can easily be done by removing a few screws. This is ideal for those looking to achieve the best performance possible. Position 1: stock height up to a 7" prop. Position 2: (+) 0.41" for up to a 8" prop. Position 3: (+) 1.0" for up to an 9" prop.Three step installation:Attach motor base plate to the stock plastic mount with 4 supplied pan head screws. (On the two smaller holes, the screws will thread through the plastic and into the aluminum base)Attach new motor to motor plate with 4 supplied flat head screws.Attach motor plate to motor base at desired height with 4 suppled pan head screws.Included: 1 - EBS 2 Base Plate and EBS Motor Plate, 4 base screws, 4 motor plate screws, and 4 motor screws.Total Weight: 16g*** This is for the Multipex Easy Star 2 *** *** An adjustable motor mount for the original Multiplex Easy Star 1 is available here *** Compatible Motors28mm Outrunners35mm Outrunners (recommended for heavy models needing a lot of thrust)Due to the large variety of compatible motors Please verify motor size and KV will suite flying styleAcceptable bolt patterns (units in mm):16x1616x1919x1919x2525x25Notes:- The stock folding spinner can be utilized with different sized props and motosr with a 3mm or 3.17mm motor shaft. - A 35mm outrunner motor will only fit in position 3 (+ 1.0"). 28mm outrunners will work in any of the three positions. - For motors utilizing a 'bolt on' propeller shaft, only positions 1 (stock) and 3 (+ 1.0") will work properly due to the motor shaft sticking out of the back of the motor. - The stock thrust angles are retained in all 3 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations.Center of Gravity should always be checked and adjusted per the user manual after installation of a new motor. The fit and quality of these mounts are excellent. These are manufactured by Small Parts CNC. Please visit our for more RC products. *** Take a look at our aluminum servo mounts for the common 9g and 5g servos. Instead of gluing your servos directly to your plane, glue in the aluminum servo mounts instead and easily install and remove your servos at any time. Free Shipping on aluminum servo mounts when purchased with an aluminum motor mount! *** 5g aluminum servo mounts and the 9g aluminum servo mounts - Small Parts CNC is in no way liable for any damages or injuries due to installing one of these motor mounts.- Thank You for looking!___________________________________________________SHIPPING INFORMATION ___________________________________________________Domestic Shipping: Domestic orders are shipped via USPS First Class Mail. A delivery confirmation number will be e-mailed and posted to ebay when the package is ready to ship. This can be used to track your package. Since this is a delivery confirmation only, tracking may be limited in some cases. International Shipping International orders are shipped via USPS First Class International Mail. A customs number will be e-mailed and posted to ebay when the package is ready to ship. There is NO Tracking available on International orders. The customs number can be used for limited tracking of your package while in the United States. Once the package has left the United States, tracking will no longer be updated. If you would like complete tracking on your International order, please contact us. International tracking starts at $38.00 per order and varies from country to country.
Price: 15.95 USD
Location: Santa Barbara, California
End Time: 2024-10-27T21:58:30.000Z
Shipping Cost: 4.95 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
For Vehicle Type: Airplane
Fuel Source: Electric
For Vehicle Brand: Multiplex
Type: Airplane Parts
Sub-Type: Hardware & Accessories
Brand: Small Parts CNC
MPN: SPCNC0213
