Multifunctional Manual Hand Car Tire Spreader Portable Tire Changer 4"

Description: About this item 【Wide Applicability】Very suitable for tire sizes from 4" to 16.5". It fits almost all types of tires from cars to light trucks【High-quality coating】Coated with bright anti-rust and anti-corrosion coating, it is very suitable for indoor and outdoor use. Moreover, it is easy to clean.【Convenient design】The bead breaking machine is easy to operate, and can break the beads in a few seconds. This tire strip has been specially designed to save effort and tighten.【Easy to assemble】includes all assembly hardware. The concise and clear instructions are easy to combine and can save you time.【Durable material】This tire changer is made of strong iron, strong and durable to maintain its shape. It ideally provides stability and balance under heavy wheels, making work safe and convenient. This manual tire changer is suitable for vacuum tires of trucks cars motorcycle gocart trailer bike ATV for rim sizes 4" to 16-1/2" tires.Locking collar securely holds the wheel while mounting / dismounting tire How to fix a wheel? Adjust the sliding clamps to the proper wheel size by aligning them with the universal marks on each arm. Insert pins to the outside of the clamps, and then snugly tighten the two clamps against the pins to securely hold the wheel in place. To adjust the clamp to a size larger than the wheel to be serviced, rotate the crank arm while positioning the adjusting clamp. Place the wheel in position and push the wheel rim against the two sliding clamps. Then, insert the appropriate center post into the wheel center and seat it firmly into the center hole of the changer. Finally, tighten the adjustable clamp to securely fasten the wheel in place. How to mount & demount a tire? --The first method. To demount a deflated tire, use the "fod-end" of the tire tool. Push the ball end under the top bead and rest it on the tire as shown in the illustration. While holding it against the center post with one hand, lift up on the tire with the other hand, and rotate the tool full circle. To demount the bottom bead, use the same method as above. The angle of the tool against the center post can be adjusted to accommodate the operator's height or rim depth without affecting the ease of operation. To mount the tire, use the "flat-end" of the tire tool. While applying pressure to the low side of the tire, which should always face the operator, place the ball-end between the rim and bead. With the flat side of the tool against the center post, rotate the tool full circle for both the bottom and top beads. How to mount & demount a tire?--The second method. To begin, deflate the tire and place the wheel on the locating bar at the base of the Main Stand. Position the bead breaker shoe in the bead area and adjust the pivot bar on the Main Stand Base to the proper height. Next, insert the demount bar into the shoe and pry down to break the bead. If necessary, turn the tire 90 degrees and repeat the process. To break the bead on the other side, turn the wheel over and repeat this step. It is coated with a bright anti-rust and anti-corrosion coating, making it perfect for both indoor and outdoor use. Additionally, it is incredibly easy to clean, which adds to its convenience.

Price: 314.99 USD

Location: Multiple Location

End Time: 2023-12-28T08:00:46.000Z

Shipping Cost: 0 USD