Description: Why You Need MUCAR VO7?1.Full systems diagnostic Free 3 Years for all cars.2.Supported 28 resets special functions Lifetime Free for all cars.3.Support professional function ECU Coding+Active Test(BI-Directional Control) Free 3 Years.4.Supported more than 100+ car brands5.Supported 17 language:English,French,Spanish,German,Russian,Italian,Portuguese,Japanese,Polish,Hungarian, Arabic, Greek, Slovak, Dutch, Korean, Turkish, Czech6.Lifetime technical supportFree 3 Years All Cars Full System Diagnostic:The Diagnostics application enables a data link to the electronic control system of the test vehicle for vehicle diagnosis. The application performs functional tests, retrieves vehicle diagnostic information such as trouble and event codes and live data for various vehicle control systems,such as ABS,SRS,Engine,Transmission,Brake System,Emission System,Fuel system,Light system,Wiper System etc.Lifetime Free All Cars 28 Reset Services:*Not all vehicles support all reset functions. For example, ODO reset can only be used for some models. Please send vehicle model and year to customer service for inquiry.1.Oil ResetIf the oil maintenance light is on, the car needs to be maintained. After the maintenance, the driving time and other data should be reset to zero, so that the maintenance light will be turned off, and the car system will enable a new maintenance cycle.2.Brake Reset1. When the brake is used to a certain thickness, the brake sensor line will be worn, and the brake pad sensor line will send a signal to the car computer to prompt the replacement of the brake pad. After replacing the brake pads, the brake needs to be reset, otherwise the car will still alarm.2. Need to do the reset situation:a. replace the brake pad and brake pad wear induction line;b. brake pad indicator light on;c. brake pad sensor line short-circuit repair;d. After replacing the servomotor3.BMS battery resetFor a vehicle with the battery management function, if the battery status is detected as faulty (aging or damaged), the fault code will saved in the ECU. After replacing the battery and running "BMS Reset", it can delete the fault code and re-match, based on the relevant information of the existing battery as the standard, let the monitoring unit monitor. Avoid false positives from instrument error messages4.DPF(Diesel Particulate Filter) RegenerationDiesel Particulate Filter in the working process, particles will accumulate in the filter, when it reaches a certain value, it will lead to engine power and economic performance decline, must be removed in time to ensure that DPF continues to work normally.5.SAS Steering Angel ResetAfter the vehicle is disassembled or replaced with parts related to the steering function, the steering Angle learning function needs to be performed.6.TPMS Tire Pressure Resetonly applicable to vehicles without a tire pressure sensors.if the tire pressure is too low or air leaking, replacing or installing tire pressure monitoring equipment, replacing tires, tire pressure sensor damage, and cars with tire pressure monitoring function in the case of tire transposition etc,.Tire pressure reset is required after vehicle maintenance and turn off the tire pressure fault indicator light.7.IMMO Key matchingWhen replacing the ignition switch key, ignition switch, combined instrument panel, engine control unit (ECU), body control module (BCM) and remote control battery, IMMO key matching is required.8.ABS BleedingIn the case of replacement of ABS system, ABS pump, brake pump, brake line and brake fluid, it is necessary to bleeding the ABS system through the ABS bleeding function.9.Sunroof ResetThe sunroof needs to be reset when the sunroof control unit have communication problem or changed.10.Suspension ResetWhen the body height sensor or control module in the air suspension system is replaced, or the car level is wrong, the vehicle needs to perform this function to adjust the body height sensor for level calibration11.Gearbox (Transmission )ResetWhen the transmission parts wear and aging become serious, the adaptive learning of the control unit does not work, and the parts need to be repaired and replaced, then the automatic transmission control unit needs to be forced to learn.12.AFS Headlamp ResetThis function can initialize the adaptive headlight system. The adaptive headlight system can decide whether to automatically turn on the headlights according to the ambient light intensity, and monitor the vehicle's driving speed, body attitude, etc., and timely adjust the lighting Angle of the headlights. When replacing a new headlight, headlight automatic motor, or there is a fault code that is not set by the headlight, it is necessary to perform headlight matching features.13.Injector CodingAfter replacing the ECU or injector, each cylinder injector needs to be coded to confirm or recode. So that the cylinder can better identify each cylinder injector, accurate control of fuel injection.14.ETS Learning(throttle matching)Need to perform throttle matching: Replace the electronic control unit, power off the electronic control unit, replace the electronic throttle assembly, replace or disassemble the intake port, clean the throttle.15.Gear LearningGear learning is required when replacing the engine ECU, crankshaft position sensor, crankshaft flywheel, and fault code that the gear has not learned,it is necessary to gear learning.16.EGR Self-LearningIf the EGR fails, the engine/EPC fault indicator light of the vehicle instrument will light up, and the EGR self-learning function can turn off the fault indicator light after cleaning or replacing the EGR valve.17.A/F ResetThis function is applied to set or learn Air/Fuel ratio parameters.18.Adblue Reset(Diesel Engine Exhaust Gas Filter)After the diesel exhaust treatment fluid (car adblue) is replaced or filled up, Turn off the adblue fault indicator light by adblue reset.19.Airbag Resetthis function is only available for some models, please consult the sellerThis function resets the airbag data to clear the airbag collision fault indicator.20.Coolant BleedingUse this function to activate the electronic water pump before bleeding the coolant system. Electronic water pumping systems are commonly found in BMW models.21.Tyre modificationTire size parameter setting after tire modification or replacement.22.Language ChangeThis function is used to change the system language of the vehicle central control panel.23.Nox Sensor ResetNox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.24.ODO Resetthis function is only available for some models, please consult the sellera) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODO reset after maintenance.25.Stop/Start ResetThis function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).26.Seat CalibrationThis function is applied to match the seats with memory function that are replaced and repaired.27.Transport Modeln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.28.Windows CalibrationThis feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.Support to ECU Coding Free 3 Years:The Coding function is used to re-flash the vehicle control modules.It is used to reprogram adaptive data for vehicle control modules after repairs or replacements of vehicle parts;Provide solutions for the issues of Drivability,Fuel Efficiency,Power Loss,Fault Codes,Durability of Mechanical Parts etc.;Brake the limitations and restrictions;make full use of the car hidden features,like change the chimes on car,set how many times the one-touch signal flickers for one touch,remember settings for Start/Stop systems,and more.Support Active Test(BI-Directional Control) Free 3 Years:If the actuator is normal,without using the vehicle's controls,to get a significant boost in effectiveness:[Turn on the radiator fan|Modulate the throttle|Open/close windows|Operate mirrors|Turn on/off the lights|Turn on/off the sound horn|Test door lock …]Free Full OBD2 Functions:*-Read extensive current, pending and permanent codes in OBD system quickly*-Clear detected fault codes and turn off the Check Engine Light efficiently*-View graphical live data of vehicle's computer module(s) for easy analyses*-View the vehicle's operating parameters at the moment a DTC is detected*-Read I/M readiness status to have a vehicle inspected for state emissions compliance*-Perform O2 sensor test to check fuel efficiency and vehicle emissions*-Read the results of on-board diagnostic monitoring tests for specific components/systems*-Retrieve the vehicle information of VIN, CINs, and CVNs completely*-Perform the component Test by allowing initiating a leak test for the vehicle's EVAP systemDiagnostic Cover Most of Vehicles That Support The OBDII Protocol After 1996.For Amercianfor Buick, for Chrysler, for Cadillac, for Chevrolet, for Doge, for AU Ford, for Brazil Fiat, for Brazil GM, for Ford, for GM, for Jeep, for Lincoln, for SGMFor Europeanfor Aston Martin, for Audi, for Alfa Remeo, for Abarth, for BMW, for Bentley, for Bugatti, for Citroen, for DR, for Dacia, for EU Ford, for Ferrari, for Fiat, for GAZ, for Iveco, for IZH, for Jaguar, for Land Rover, for Lamborghini, for Lancia, for Mercedes, for Maserati, for Maybach, for Mini, for Opel, for Opel (south africa), for PAZ, for Peugeot, for Porche, for Renault, for Rover, for Rolls-royce, for SAAB, for Seat, for Skoda, for Smart, for Sprinter, for UAZ, for VAZ, for Volvo, for Volkswagen, for Vauxhall, for ZAZFor AsianAcura, for Daewoo, for Daihatsu, for AU Holden, for Honda, for Hyundai, for Ikco, for Isuzu, for Infiniti, for Kia, for Luxgen, for Lexus, for Mahindra (India), for Maruti (India), for Tata (India), for Mahindra, for Maruti, for Mazda, for Mitsubishi, for MVM, for Nissan, for Nissangtr, for Perodua (Malaysia), for Proton (Malaysia), for Perodua, for Proton, for Renault Samsung, for Saipa, for Ssangyong, for Subaru, for Suzuki, for Toyota, for Tlisuzu, for United PakistanJapanese cars compatible with JOBD protocol are not supportedSupported 17 language:English,French,Spanish,German,Russian,Italian,Portuguese,Japanese,Polish,Hungarian, Arabic,Greek,Slovak,Dutch, Korean, Turkish, Czech4 IN 1 Scientific Data Management:1.Live Data Stream Graph&Record Data&Diagnosis Record Playback&Print Report2.The professional vehicle scanner tool can scientific graph data,record data,play back data,freeze frame,and print reports.3.In the real-time diagnosis process,important diagnosis information can be instantly stored in the memory,including reading of fault codes and frozen frames and real-time data streams.4.After real-time diagnosis is completed,Diagnosis function record playback,the diagnosis information and process previously saved in the memory can be replayed to facilitate the analysis of various data information.5.One-click generation of a diagnosis report after diagnosis will help users quickly solve problems,avoid blind maintenance, and save money/time.Packing List:
Price: 349.99 GBP
Location: Bradford
End Time: 2025-02-01T19:14:13.000Z
Shipping Cost: 18.33 GBP
Product Images
Item Specifics
Return postage will be paid by: Buyer
Returns Accepted: Returns Accepted
After receiving the item, your buyer should cancel the purchase within: 14 days
Return policy details: 1.Only defective product will be offered return and excahnge. 2. If you want return exchange products ,please do contact us within 3 days, after you receive the package. And contact us with defective items quantity and clear picture. We will process your return within 1-3 days. And we are not responsible for all further shipping fees.
Display Screen: 5.99-Inch/TFT(IPS)
Feature 1: 28 Resets Function Free to use
Vehicle Type: Passenger Vehicle
Feature 3: ECU Coding,Action test
Manufacturer Part Number: MUCAR VO7
Feature 2: All system diagnostic Tool
Feature 5: Support 13 Multi-Langauge
MPN: MUCARVO7
Feature 4: Support more than 93 automobile brands
Brand: MUCAR
Supported System: ABS, SAS, TPMS, SRS, EPB, DPF
ROM: 16G
Accessories: User Guide, Software Disc, Memory Card, Carrying Case, Adapter Cable, USB Cable
Unit Type: Unit
Version: 2023 latest (network update)
Function 2: Support 28 Reset Service Free
Connectivity: Bluetooth
Function 1: OBD2 Full Function
OBD Interface: OBD, CAN, OBDII, EOBD
Features: LCD Display, User Friendly, Backlit Display, Internet Updateable, Check Engine Light Shut Off, Colour Display, Freeze Frame Displays, Multi-Language Interface, Erases Codes
RAM: 2G
