Mopar 440 Engine

Description: 440 Mopar engine long block for sale. Engine block has been cleaned, checked for cracks, bored & honed 0.040'' oversized, align honed, and resurfaced 0.012''. Cylinder heads have been cleaned, checked for cracks, machined for all new guides and seats, cut for positive valve seals, and have been resurfaced 0.007''. Connecting rods have been cleaned, checked, and reconditioned. Crankshaft has been cleaned, checked, main journals have been polished Std size, and the rod journals have been ground and polished 0.020'' undersize. Rocker arms are factory stamped steel that have been disassembled, cleaned, and reassembled with new end plugs. Engine has undergone a break-in procedure, using Driven 10W-40 break-in oil, and is ready to be installed to be put into use. The sale of the engine comes with the following parts:Sealed power pro forged .040'' over pistons. PTW clearance 0.0017''. Pistons are sitting at zero deck height.Hastings .040'' over ring set. Top ring gapped at 0.018'', 2nd ring gapped at 0.017''Clevite cam bearing setClevite main bearings Std. size P series 0.0025'' oil clearance for mains 1-4, and 0.0032'' for main 5.Clevite rod bearings 0.020'' undersize P series ranging from 0.0015''-0.0022'' oil clearance New core plugs and intermediate shaft bushingMancini Racing rear oil seal retainerNew 2.080'' intake and 1.750''exhaust valves New intake and exhaust valve seatsNew intake and exhaust valve guides, cut for positive valve sealsNew valve springs, shimmed to 1.850'' spring install height @ 130 pounds of spring pressureCamshaft is a one bolt purple shaft Mopar cam. It is a hydraulic flat tappet that has been reprofiled. Cam card is in pictures.New Old Stock Competition Cams hydraulic lifters Solid 9.315'' pushrodsSummit Racing 9-way adjustable timing setCometic .051'' head gasketsFactory Mopar Spead bore intake manifoldFel-Pro lower gasket setStock Mopar oil pumpMopar oil drive with pinned gearStamped steel Mopar rockers Stock 402 5-quart panCal-custom valve coversWix oil filterAutolite 85 spark plugsFactory Mopar harmonic balancerIron water pump housing, water pump, and thermostat housing The following IS NOT included with the sale of the engine:Test Run standRadiator and hosesDistributor, ignition wires, coil, starter, alternator, ignition systemCarburetor, air cleaner, fuel system, PCV valveDrive belt, pulleys, bracketsBellhousing, flywheelHeadersOil dipstickValve cover breather If you are interested and would like to know more details, feel free to message me. I'm asking $6,500.00, or best offer. Local pickup only. Engine will remain on test stand until it is sold, so that buyer can hear it in person.Thanks for looking

Price: 6500 USD

Location: Sevierville, Tennessee

End Time: 2024-12-04T00:46:31.000Z

Shipping Cost: N/A USD