MIG Welding Wire ER308L Stainless Steel .035" 2.5Lb (1)

Description: FAST SHIPPING PRIORITY MAIL SANDVIK MIG Welding Wire ER308L Stainless Steel .035" 2.5Lb x 1 Roll 2.5 Lb TotalFast shipping USPS Class: ER308LAWS: A5.9Conforms to Certification: AWS A5.9 ASME SFA A5.9Weld Process Used for Mig (GMAW) and Submerged Arc (SAW)AWS Chemical CompositionC = 0.03 maxCr = 19.5-22.0Ni = 9.0 – 11.0Mo = 0.75 maxMn = 1.0 – 2.5Si = 0.30 – 0.65P = 0.03 maxS = 0.03 maxCu = 0.75 maxAvailable SizesDiameter X Spool SizesDiameter X Coil Sizes.025 x 2#, 10#, 25#1/16 x 60# & mill coil.030 x 2#, 10#, 25#, 30#, 33#5/64 x 60# & mill coil.035 x 2#, 10#, 25#, 30#, 33#3/32 x 60# & mill coil.045 x 2#, 10#, 25#, 30#, 33#1/8 x 60# & mill coil1/16 x 10#, 25#, 30#, 33#3/16 x 60# & mill coil5/32 x 60# & mill coilApplicationER308L has the same analysis as type 308 except the carbon content has been held to a maximum of .03% to reduce the possibility of intergranular carbide precipitation. ER308L is ideal for welding Types 304L, 321, and 347 stainless steels. This is a suitable wire for applications at cryogenic temperatures.Deposited Chemical Composition % (Typical)C = 0.02Si = 0.32Mn = 1.70P = 0.011S = 0.009Cr = 20.0Ni = 10 Mechanical Properties (R.T.) Yield Strength57,000 psiTensile Strength87,000 psiElongation34%Reduction of Area56%Deposited All Weld Metal PropertiesData is typical for ER308L weld metal deposited by Mig using Argon + 2% oxygen as the shielding gas. Data on sub-arc is not presented, as sub-arc is dependent on the type of flux used.Recommended Welding ParametersGMAW “Mig Process”Reversed PolarityWire DiameterWire FeedAmpsVoltsShielding GasGas CFHShort Arc Welding.03013-2640-12016-20Argon+2% O225.03513-2660-14016-22Argon+2% O225Spray Arc Welding.03520-39140-22024-29Argon+2% O238.04516-30160-26025-30Argon+2% O2381/1610-16230-35027-31Argon+2% O238Other shielding Gases may be used for Mig welding. Shielding gases are chosen taking Quality, Cost, and Operability into considerationRecommended Welding ParametersSAW “Submerged Arc Welding Process”Reversed Polarity SuggestedWire DiameterAmpsVolts3/32250-45028-321/8300-50029-345/32400-60030-353/16500-70030-35Both Agglomerated and fused fluxes can be used for submerged arc welding.Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and Mechanical properties.

Price: 18.99 USD

Location: Pelham, New Hampshire

End Time: 2024-02-22T01:19:46.000Z

Shipping Cost: 7.99 USD