METRINCO M120W moisture meter for wood and building materials. Scan depth 50 mm.

Description: Professional moisture meter for wood and building materials METRINCO M120WProfessional non-destructive moisture meter for wood and building materials METRINCO M120W.It is designed for fast and accurate measurement of wood moisture, including lumber, treated and untreated timber, as well as building materials ‒ concrete, screed, cinder block, plaster, tiles, bricks, sand, etc.It is the most popular universal moisture meter in our range. Thanks to a special spring sensor, the device can measure the moisture content of materials with a rough surface while maintaining high measurement accuracy. The M120W moisture meter can also measure materials under non-conductive surfaces, such as painted or polymer-coated boards, concrete under linoleum, moisture content of materials in PVC bags, etc.The moisture meter operates on a dielcometric principle.To make a measurement, you need to attach the sensor plates of the device to the object of measurement and wait for the device to stabilise.Features of the Metrinco M120W moisture tester:Wide measuring range: 0...80 % depending on the material group.High accuracy of the device: 1,5 %.Number of wood groups: 5.Number of groups of building materials: 6.English language menu, easy search for the required wood group.High-quality ABS plastic case with a protective silicone (rubber) cover screen backlight.The presence of a spring sensor makes it possible to measure the humidity of materials with an uneven or rough surface with high accuracy.Penetration of the high-frequency radiation field: 50 mm.Operating conditions: 0~60 °C, 0-90 % relative humidity.Power supply: 3 x 1.5 V AAA batteriee.How to use METRINCO M120W moisture meter?1. Press the POWER key to switch on the device.2. Press the SET key to enter the material group selection mode. Use the up (HOLD) and down (LIGHT) arrows to scroll through the list of material groups until you select the desired one. Press the SET key again to confirm the material group selection. The instrument is now ready for measurement. 3. To perform the measurement, place the sensor plates on the sample. Wait until the moisture meter readings stabilise and read the value on the device screen.Attention: if the sample moisture content is higher than the upper limit of the moisture range for a particular material group, the device will display the upper value of the range for this material group during the measurement. For example, when measuring the moisture content of a screed (BM3 group), the value on the screen is 7.5%, and when measured at other points of the screed it is still 7.5%, this means that the moisture content of this screed is higher than the upper limit of the range for this group (7.5% for BM3 group).Table of groups of materials for METRINCO M120W moisture meter GroupMaterialWoodDensityW1aspen, cedar300‒400W2pine, walnut tree, spruce, poplar, linden, alder400‒500W3cherry tree, birch, maple, pear tree, elm500‒600W4yew, beech, acacia, oak600‒700W5ash, hornbeam, evergreen oak700‒800Building materialsBМ 0plasterboard, fibreboardBМ 1cinder block, cinder concreteBМ 2plaster, wall tiles, bricksBМ 3anhydride cement, sand-cement screed, slag, asbestos, sandBМ 4concrete, cement screedBМ 5marble

Price: 260 USD

Location: Kyiv

End Time: 2025-01-19T10:53:14.000Z

Shipping Cost: 10 USD