Description: Remote Start Controller KitFor use in MEP-831A Generators WiFi Remote Control & 2-Wire Start/Stopwith Digital Governor ControllerFeatures include:- 2-Wire Remote Start/Stop interface for use with ATS, Solar Charge Controller, or even a toggle switch.- Digital Governor Controller which replaces the problematic stock SLC100 Governor Controller- Adds Engine Temperature and Oil Pressure sensors- Remote Start/Stop via WIFI using a cell phone, laptop, tablet, etc. Anything with WiFi and a browser!- Direct WiFi communication. No router needed. Works during power failures.- 300 foot plus WiFi range. Password protected - Browser display of all engine and generator operating parameters on remote WIFI device. Parameters nearing extremes are highlighted in red text. --> Ambient Temperature --> Battery Voltage --> AC Voltage --> %Load --> Fuel Level --> Engine Temperature --> Oil Pressure - Remotely Enable and Disable the Auxiliary Fuel Pump- Remote control of the Contactor with the Contactor state displayed- User calibration of all parameters- Data Logging of all parameters as well as engine hours and Start/Stop count. Min, Average & Max values logged every 10 seconds. - Two wire remote Start/Stop for use with ATS, Charge Controller or a basic switch- Transfer between WIFI and Manual control while running- Automatic Pre-Heat below 40 degrees F- User programmable durations and delays for all phases of start up and shutdown. Separate settings for WiFi Start/Stop and 2 Wire Start/Stop--> Pre-Heat duration--> Fuel System prime duration--> Cranking duration--> Warm up--> Stop command to contactor open delay--> Cool down delay- Antenna and connector are IP65 rated for water resistance. - Retains full manual control of the generator thru it's front panel- Controller is conformally coated to prevent corrosion- Wire harness utilizes Mil Spec wire rated to 300 F- Includes Controller, wire harness, antenna, drill template, Stainless Steel mounting hardware for installation & printed Installation and Users manual.Once built each Controller is tested in a generator simulator and then installed in an MEP-831A, tested and initially calibrated to assure a defect free unit. Customer support provided to assist with installation.Returns accepted within 30 days. Click on "See Other Items" to see the variety of MEP Generator supplies and accessories available!
Price: 625 USD
Location: Pepperell, Massachusetts
End Time: 2024-08-29T21:44:05.000Z
Shipping Cost: 18.4 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Custom Designed
MPN: Does Not Apply
Bundle Listing: No
Country/Region of Manufacture: United States
Equipment Type: Remote Start
Modified Item: No
