Master Cylinder and Mount, Fits 1955-59 Chevy Pickup

Description: High-tech corvette-style master cylinders were designed using OE specifications and 100% tested, Features a 1" bore and are suited for disc/drum combinations, Each master cylinder has 3/8"-24 IFF outlets on both the left and right sides allowing for installation in many different applications, Bolts to the frame, Re-use your original brake pedal 1955-59 Chevy Pickup Master Cylinder and Mount Sku # 9101375 Mfr. Part # 9101375 Condition New Brand Speedway Motors Sold Kit Details Info Master Cylinder These high-tech Corvette-style master cylinders were designed using OE specifications and 100% tested. They have a 1" bore and are suited for disc/drum combinations. Each master cylinder is ported on both the left and right sides, allowing for installation in many different applications. This exclusive design features a mating flange that works with applications requiring 3-1/8” through 3-3/8” bolt patterns. These master cylinders will work with manual or power brake systems and can be quickly changed with the included adapter pin to plug the deep well. The wide body and low profile gives this master cylinder the clearance you need when installing in tight areas and yet it maintains a large volume of fluid necessary for 2 and 4 wheel disc brake applications. 1" bore 3/8"-24 IFF outlet ports on both sides Plugs are included for the unused ports Mount spacing is 3-3/8", accomodates 3-1/8" applications Works with power or manual brake systems Compact, for installation under floor or on firewall Suited for either disc/disc or disc/drum combinations Stroke of this master cylinder is approximatlely 1-1/16" Has a piston adaptor that will allow for power or manual applications Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Bracket This bracket allows you to replace that old single reservoir master cylinder with a modern dual reservoir unit. Bracket bolts to the frame and re-uses your original brake pedal. Designed for all disc and drum brake systems. Accommodates master cylinders with bolt center spacing of 2-7/8" to 3-3/8". Charts (JPG) (PDF) Installation Tips Pushrod to mounting flange is 5.5". Two 3/8"-24 IFF outlet ports on both sides of the cylinder. Plugs are included for the unused ports. Works with both manual or power brake setups. Steel and brass plugs available: steel, brass. Specs Sold in Quantity Kit Finish Natural Reservoir Type Integral Master Cylinder Bail Type Double Bail Wire Zinc Lid Outlet Fitting 3/8"-24 IFF Centerline of Holes 3.38 Overall Height 4.75 Reservoir Included Yes Master Cylinder Cap Included Yes Overall Width 4.5 Mounted Length 8 Brake System Type Disc/Drum Outlet Count Tandem/Both Sides Master Cylinder Material Steel Master Cylinder Bore Size 1 Inch Stroke 1.0625 Number of Mounting Holes Two MFG. Part # 9101375 Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 163.99 USD

Location: Lincoln, Nebraska

End Time: 2024-08-24T11:03:31.000Z

Shipping Cost: 0 USD