Magewell Pro Convert HDMI 4K Plus HDMI To NDI Encoder

Description: Magewell 4K HDMI to NDI encoder in near mint condition. All original mounting hardware, documentation and tally indicators included. From the manufacturer: Pro Convert HDMI 4K Plus Converts a 4K HDMI input signal into Full NDI® with loop-through SKU: 640100000 (for US/EU/UK/AU/JP users); 640100006 KR Supports up to 4096x2160 60fps (4:4:4) input signals including 1080p 144fps Connects existing source equipment into NDI-enabled, IP-based media networks Plug-and-play ease of use with automatic input format detection and DHCP network configuration Pro Convert HDMI 4K Plus Specifications: Input & Loop through Features Max input & loop through signal: 4096x2160 60fps 4:4:4 8-bit Input video at any format by custom EDID of input port Video formats: RGB, YUV BT.601/709/2020 8-channel HDMI-embedded audio HDMI interfaces: HDMI 1.4/2.0, DVI-D NDI® Encoding Features Encoding Full NDI real-time stream at up to 4096x2160 60fps 4:2:2 8-bit 1920x1080 240fps 4:2:2 8-bit Output the same resolution as input or any custom resolution. Typical outputs include: 4096x2160p/3840x2160p/2048x1080p 23.98/24/25/29.97/30/50/59.94/60 1920x1080p/1280x720p 23.98/24/25/29.97/30/50/59.94/60/100/119.88/120 1920x1080i 25/29.97/30/50/59.94/60 720x480p/720x480i 59.94/60/119.88/120 720x576p/720x576i 50/100 Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate Encoding 8-channel NDI-embedded audio Support NDI 5.x Configuration Management Register with Control Hub Remote control via WebUI and Control Hub Provide comprehensive information regarding the device and input signals in real-time Allow to configure how an input is processed and encoded, including deinterlacing, EDID, up/down scaling, frame rate, aspect ratio, as well as the network connection Update firmware Support USB RNDIS/ECM Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers Provide HTTP APIs On-board Control Buttons 16 Position Rotary DIP Switch: set board-index from 0 to F PTZ Control Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI Mini-DIN–8 jack (shared with Tally light) Network Interfaces 10/100/1000Mbps Ethernet IEEE 802.3af PoE USB Interface USB2.0 Type B 5V/2.1A power supply USB RNDIS/ECM Supported Products NDI Studio Monitor OBS vMix Any other NDI-enabled product LED Indicators Status LEDs indicate: Power supply: on/off Tally: preview/program Input signal: locked/unlocked Loop through signal: device connected and signal detected/undetected Form Factor 117.5mm (L) x 66.7mm (W) x 23.4mm (H) Accessories USB 2.0 A to B cable 5V/2.1A power adaptor Mini-DIN 8 breakout cable Tally light L-bracket Screw Mounting Hole ¼–20 threaded hole Power Consumption 5V max current: ~2A Max power consumption: ~10W Working Environment Operating temperature: 0 to 45 deg C Storage temperature: –20 to 70 deg C Relative humidity: 5% to 90% non-condensing

Price: 800 USD

Location: Port Jervis, New York

End Time: 2024-11-20T19:56:18.000Z

Shipping Cost: N/A USD