Lutron RR-MAIN-REP-WH RA2 main processor

Description: Lutron RR-MAIN-REP-WH Radio RA 2, Main Repeater, 120 VAC Input Power W, 9 VDC Output Power, 0.3 A, Wall, Ceiling, or Level Surface Mounting, WhiteBenefits of total light controlTurn your lights on and adjust your shades to the specific levelStylish products that will complement your homes dcor.Tap twice for full onControl lights and shades from wall-mounted, tabletop, or handheld controls, in a specific room or remotely from another room or even outside your homeWhen you dim a standard halogen or incandescent light bulb by 25%, you will save 20% and extend the life of light bulbs.System DesignIdentify the lighting areas of the home to be controlled.Install devices to control as much of the lighting within the areas as possible. This includes in-wall dimmers, table lamp dimmers and shadePlace at least one keypad in each lighting areaChoose how keypad buttons will control your light from one of the five ways to control your lightIndividual device control Control of single wall dimmer, table lamp or shadeLocal scene Preset scene for all lighting and shading within a roomWhole home scene Illuminates part of or most of the home for specific activity or moodRoom monitoring Allows a user to see if lights within a specific room (or entire house) are on or off5Path of light Illuminates a convenient path of light to take the user from one location to the nextSystem ComponentsDimmers and Switches, Note : Dimmer and Switch locations with 3- and 4- way applications must use RadioRa 2 Remote Dimmers, Remote Switches, or Wall-mounted Keypads.seeTouch Wall-mounted Keypads.Radio Powr Savr Occupancy/Vacancy SensorsSivoia QS wireless ShadesGrafik Eye QS RF control unitsVisor Control Transmitter(VCTX) and Visor Control Receiver(VCRX)DiagramDiagramFeaturesRadioRA 2 Repeaters extend the range of Radio Frequency (RF) signals that are sent between dimmers, switches, keypads, visor controls, shades / draperies, and other devicesMount Receiver on a wall, ceiling, or level surface using the two #6 (M3) screws providedRepeaters communicate with the system through RFAll devices (except remote dimmers / switches) must be located within 30 ft (9 m) of a RepeaterAll repeaters must be within 60 ft (18 m) of another repeaterTest button - enters the system diagnostic modeAdd button - enters the system address modeCan be programmed from a PCRS485 port to connect to other Repeaters through a wired link (daisy-chain)Main Repeaters allow configuration and integration to the system through Ethernet or RS232 portsSpecificationStyleRadio RA 2TypeMain RepeaterInput Power (VAC)120Input Wattage (W)6.5Output Power (VDC)9Max Capacity (A)0.3Typical Power Consumption (W)3.1MountingWall, Ceiling, or Level SurfaceConnectionEthernet, RS232, RS485 and USB (Lutron use only)FinishGloss FinishColorWhiteWidth (In.)4.25Height (In.)5.25Depth (In.)1.06

Price: 280 USD

Location: Pacoima, California

End Time: 2025-02-02T21:14:30.000Z

Shipping Cost: N/A USD