Lumencor Aura 4 Color Light Engine Teal 513nm Yellow 575nm Cyan 475nm Blue 438nm

Description: Lumencor Aura 4 Color Light Engine Teal 513nm Yellow 575nm Cyan 475nm Blue 438nm This light engine made by Lumencor for Applied Precision / Delta Vision is tested and in good working condition. We're including the required 24V power adapter (not shown). The light output is through an SMA connector which requires a 1000um or larger core diameter fiber patch cable which is not included. This engine has 4 light sources. The powers shown below are actual measured power at the SMA port. The power exiting an attached a fiber cable will be lower.Channel 1: Teal LED - 513nm / 17nm FWHM @ 35mWChannel 2: Yellow Luminescent Light Pipe - 575nm / 25nm FWHM @ 240mWChannel 3: Cyan LED - 475nm / 28nm FWHM @ 140mWChannel 6: Blue LED - 438nm / 24nm FWHM @ 180mW This system works nicely with the Lumencor 7 channel GUI over the RS-232 port. The GUI software can be found on the Lumencor website in the Spectra X section (Spectra X is a very similar unit that supports up to 6 channels). The Auras 4 channels are mapped differently than the colors in the GUI.Red = Teal channelGreen = Yellow channel (G/Y switch does not change the color)Teal = not usedCyan = cyan channelBlue = not usedViolet = Blue channel In addition to the GUI, each channel can be controlled with a TTL signal. When a channel is enabled with a high TTL signal, it will produce zero to full power as set by the sliders in the GUI. Due to it's higher power requirements, the yellow channel can only be enabled by itself. If any of the other channels are on when the yellow channel is turned on, those will be turned off as long as yellow is enabled. Pictures and description Copyright © 2023 Starlight Photonics Starlight Photonics Policies About Us We are a small company located in the heart of Silicon Valley. We specialize in surplus lasers and photonics and have an optics lab with many instruments such as power meters, laser diode drivers and optical spectrum analyzers. Combined with our considerable expertise, this allows us to test most of the items we sell so you can be confident that they will arrive in good working condition. FDA Disclaimer for Laser Components This product is sold solely for use as a component (or replacement) in an electronic product; therefore it is not required to, and does not comply with, 21 CFR 1040.10 and 1040.11 which pertain to complete laser products. The manufacturer of the complete system-level electronic product is responsible for complying with 21 CFR 1040.10 and 1040.11 and for providing the user with all necessary safety warnings and information. Payment and Sales Tax Order payments are handled by eBay Managed Payments which allows a variety of option such as credit, debit, and gift cards, Apple Pay, Google Pay, PayPal, and PayPal Credit. We accept Purchase Orders from accredited Universities but generally require pre-payment. Please note that sales tax is collected by eBay, not by us. If you are purchasing for resale, you need to have your reseller certificate on file with eBay before placing your order. Shipping Most orders ship within 24 hours of payment. We take pride in our careful packing of delicate items. In the unlikely case that you receive an item which has been damaged in shipping, please hang on to the packing material and contact us. We will file a damage claim with the shipper and start the process of getting you a replacement or a refund. Warranty Items we sell on eBay do not include any warranty unless otherwise specifically stated in the listing. We do guarantee that the items we sell will be delivered in the condition described in the listing. If you have a problem with your purchase, please get in touch and we'll do our best to resolve it. Return Policy Most electronic items we sell may not be returned unless the package is unopened. Please read the listing carefully, do your research and ask us any questions you need to decide if the item is suitable for your use. All returns must include all of the original accessories, paperwork and packaging. Shipping charges are not refundable and opened packages will incur a fee to cover testing and restocking the item. Returns which are not resalable due to missing parts, damage, alteration, etc. will not be refunded. International Sales Import duties, taxes, and other charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Company Information Starlight Photonics PO Box 1134 Alviso, CA 95002

Price: 599 USD

Location: Alviso, California

End Time: 2024-11-21T18:40:58.000Z

Shipping Cost: 0 USD