LMI Chemical Metering Pump C131-25 HV 8 GPH 60 psi PP HV Manual Control

Description: LMI Series C Metering Pump (High Viscosity).8 GPH @ 60 PSI, Liquid End 25HV, 115 VAC 50/60 Hz, US Plug.Dual Manual ControlStroke frequency and stroke length are manually adjustable.General DescriptionLMI Series C chemical metering pumps shall be positive displacement, Liquifram type pumps that are UL and CUL approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity.Pump ControlsAdjustment shall be by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are to be located opposite the liquid handling end.Drive AssemblyThe pump drive shall be totally enclosed with no exposed moving parts. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 44 watts per hour under full speed and maximum pressure conditions. Pump weight shall not exceed 20 lbs (9.1 kg).Pressure ReliefTo eliminate need for pressure relief valve, Liquifram shall automatically stop pulsating when discharge pressure exceeds pump pressure rating by not more than 35%.Materials of ConstructionPolypropylene, stainless steel, PTFECheck Valve, Tubing, ConnectionsA total of 16 ft (4.8 m) of tubing shall be provided per pump complete with compressing connections (on models with tubing connections). A foot valve with integral one piece strainer shall be provided for the suction line (on non-high viscosity models with tubing connections), and an injection check/back pressure valve with 1/2" NPT male connection for the injection point (on models with tubing connections). SAVE BIG HERE!!! THIS PUMP RETAILS FOR OVER $2,400.00!!! Not what you are looking for? Check out my other listings...

Price: 1725 USD

Location: Blacklick, Ohio

End Time: 2025-01-11T14:32:27.000Z

Shipping Cost: N/A USD