Linear AKR-1, ACP00747 Stand Alone Exterior Digital Keypad with Radio Receiver

Description: Linear AKR-1, ACP00747 Stand Alone Exterior Digital Keypad with Radio Receiver Linear AKR-1, ACP00747 Stand Alone Exterior Digital Keypad with Radio Receiver The Model AKR-1 Exterior Digital Keypad with Radio Receiver is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics.Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs.Up to four sets of block coded MegaCode® transmitters (up to 480 transmitters total) can be used to gain access through the AKR-1’s built-in radio receiver. Each transmitter can be individually suspended or re-activated. Four facility codes can be programmed to identify each block of transmitters. A Radio Test Mode is provided for testing transmitters and detecting radio interference. Programming of individual (non-block coded) transmitters is not supported by the AKR-1.Linear’s Model MGT safety edge transmitter is compatible with the AKR-1. This supervised transmitter is used to detect and transmit obstacle events to the AKR-1 receiver. Obstacle signals from an MGT transmitter will activate Relay #2.FeaturesSelf-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilitiesRugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestalBuilt-in radio receiverFour independent outputs and timers: two form C relays and two solid-state open collector outputsAccepts 480 entry codes, 480 block code transmitters, plus one fully supervised Model MGT safety edge transmitterTwo LED indicators show system statusKey operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockoutDown light illuminates whenever keypad is usedTactile and audible feedbackKeylock secures keypad to mounting backplateRF frequency: 318 MHz4″ W x 7″ H x 3″ DOrder number: ACP00747AKR-1Dimensions:4.0″ W x 7.0″ H x 3.0″ D (101.6 x 177.8 x 76.2 mm)ELECTRICALVoltage:12-24 Volts AC or DC (AC supply must be transformer isolated)Current:10 mA typical, 150 mA maximumOUTPUTSMain Relay:Form “C” 5 Amps @ 28 Volts maximumAuxiliary Relay:Form “C” 1 Amp @ 28 Volts maximumSolid State Outputs:Short-to-common 100 mA @ 24 VDC maximumINPUTSRF:Integral 318 MHz super regenerative receiver @ -95 dBm sensitivity (nominal); receives Linear block code transmittersOpen Request:Terminal input activates the programmed control relayDoor Sense/Inhibit:Monitors status of a protected door or can be programmed to restrict access to relay 1Keypad:Monitors status of a protected door or can be programmed to restrict access to relay 1ENVIRONMENTALTemperature:-22° F to +149° F (-30° C to +65° C)Humidity:5% to 95% non-condensingAccessories for use with the AKR-1ModelDescriptionACT-21B1-Channel Block Coded Key Ring TransmitterACT-22B3-Channel Block Coded Key Ring TransmitterACT-31B1-Channel Block Coded Key Ring TransmitterACT-34B4-Channel Block Coded Key Ring TransmitterGNB-1Burial Mount GooseneckGNC-1Curb Mount GooseneckMDT-1B1-Channel Block Coded Visor TransmitterMDT-2B3-Channel Block Coded Visor TransmitterMDT-4B5-Channel Block Coded Visor TransmitterMGTGate Safety Edge TransmitterMT-1B1-Channel Block Coded Visor TransmitterMT-2B2-Channel Block Coded Visor Transmitter Payments & Returns Policy

Price: 324.68 USD

Location: Miami, Florida

End Time: 2025-01-01T03:45:31.000Z

Shipping Cost: 0 USD