LEXUS BRAKE CALIPER STICKER DECALS DECAL!!! SET OF 8!!! 4 PAIRS!!!

Description: We are now charging for shipping with TRACKINGdue to many (Not all.. Some really do get lost in the mail) who "Claim" they didn't receive their order... Then we see online posts of them with "new" caliper decals installedThese few bad apples have ruined free shipping (Envelope and a stamp) for me and ultimately the end usersThe price has been lowered slightly to help with the now higher costs to the end user due to shipping. Up for auction are High Heat Avery and 3M Brand LEXUS Caliper Decals.Perfect for when you have your calipers refinished/re-painted Simply cut the desired size from the "Pack" and apply to your calipers, remove the pre-mask and go!For more a more permanent application you can lightly clear coat over top of the decal. We highly recommend using the clearcoat method.If not using this method practice care when washing the calipers.Though it should be fine in most cases: We do not recommend using high pressure wash directly against the decal when not "sealed/Protected" with a clear coat finish overtop. "Pack" decals include the most popular sizes Two 4.5" decals Used for FrontTwo 4" decals Used for FrontTwo 3" decals Used for RearTwo 2" decals Used for RearApplied with clear premask so you can visually see exactly where it's being placed GENERAL INSTALLATION INSTRUCTIONS:FOR BEST RESULTS, APPLY DECALS IN A WARM DRY ENVIRONMENT (55*F and above) 1) Clean the area thoroughly with rubbing alcohol or soap and water-avoid using Windex or similar products because it will leave residue behind and prevent the sticker from adhering well2) Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape (Most times your finger will do)-This removes any air bubbles that may have formed and makes the sticker Cling to the transfer tape3) Peel the paper backing off the sticker-If the sticker clings to the backing paper, slowly replace the paper backing and repeat step #24) Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card (Most times your fingers are more than enough!)5) Slowly peel the transfer tape off at an angle-Be mindful not to pull the sticker off the surface-If the sticker pulls away from the surface repeat step #4 Thanks for looking!

Price: 9 USD

Location: Scarborough, Ontario

End Time: 2024-12-20T20:34:06.000Z

Shipping Cost: 6 USD