Description: ***PLEASE NOTE*** Action figure scales vary widely. We try to hit the Classified 1/12 and the McF/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. Thank you. ****READ ABOVE**** 3d printed inspired by Fifth Element character. All heads will need to be fitted to your chosen figure. I use a hot glue method. Use petroleum jelly on the neck peg. Fill the head hole with enough hot glue to push the peg into the head and allow some of the hot glue to squeeze around the neck ball. As the hot glue dries, move the neck peg so it will not bind in the hole. All items are 3D printed and some are coated with a primer and/or printed in different colors. There can be differences and imperfections in each piece. We strive to make quality items that do not break easily, but these items can be more fragile than manufactured items and susceptible to extreme temperatures due to the material. 3D printed items are susceptible to UV light and should be protected from sunlight until finished with clear coat/paint. Thank you so much for considering a purchase!
Price: 9.99 USD
Location: Roseville, California
End Time: 2025-01-07T23:44:26.000Z
Shipping Cost: 6 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Type: Does Not Apply
