L.E. Wilson Standard Chamber Seater / Seating Die

Description: L. E. Wilson Chamber Type Inline Seater Die For: 6.5 Creedmoor BS65-CRE The LE Wilson Chamber Type Seater Die is noted for precise accuracy. Both the bull*et and case are firmly held in perfect alignment as the bull*et is seated in the case. Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. A favorite among benchrest shooters. A chamber type bull*et seater positively controls both bull*et and cartridge case alignment. The case and bull*et are completely captured by the die prior to the bull*et being pushed straight into the case by a close-fitting seating stem. This style of bull*et seater works more accurately than a conventional (7/8"-14 TPI) bull*et seating die. Seating depth adjustments are made by turning the screw inside the cap (3/8" - 24 TPI). This is one of the most accurate bull*et seaters ever made. Notes: Die positively controls both bull*et and cartridge case alignment. B ull*et is pushed into the case mouth by a close-fitting bull*et seating stem (drift). This die works in an Arbor or hand press only. L E Wilson also makes seating stems (their term "drifts") for VLD ( Very Low Drag ) type bullets which drop in to these dies. We are unable to accept returns on used, fitted, or altered parts. Returns must be in new, unused condition and in their original packaging.

Price: 80.24 USD

Location: Sevierville, Tennessee

End Time: 2024-02-19T14:11:06.000Z

Shipping Cost: 0 USD