LAUNCH X431 X-PROG3 Immobilizer Programmer Key programmer tool for X431 V+ V PRO

Description: LAUNCH X431 X-PROG3 Immobilizer Programmer Key programmer tool for X431 V+ V PROLaunch X-Prog 3 Advanced Immobilizer & Key ProgrammerX-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.Launch X-Prog 3 Features:1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and for BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading for BMW engine ISN code.2. Supported brands: for AUDI, for SKODA,for SEAT,for BMW,for MERCEDES-BENZ, for TOYOTA, etc. More models continue to be updated.3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.4. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII5. Reads & writes most Engine/Gearbox E Us without disassembling the shellLaunch X-Prog 3 Advantages:1. Supports for AUDI MQB platform engine E U replacement or cloning (Read engine E U data directly from the key).2. Supports for AUDI MQB platform gearbox E U replacement or cloning.3. Supports E U replacement for the fifth-generation of Audi (0AW/0B5) gearbox.4. Supports reading, writing & cloning the E U for the fourth-generation of V---W UDS engine.5. Supports BMW E chassis 8HP gearbox E U reprogramming to empty.6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine E U).Core Functions:1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and E U reading & writing, etc.2. Supports common E U/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.3. Supports E U replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).4. Supports E U replacement for the fourth-generation of for V---W/AUDI engine;5. Supports E U replacement for the fifth-generation of for V--W/AUDI Bosch and Siemens engines.6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable E U, and KESSY IC.7. Supports the for BMW F and G chassis 8HP gearbox E U reprogramming to empty.8. Supports the for BMW CAS4/CAS4+ module replacement.9. Supports the E U cloning and replacement for BMW Siemens engines.10. Erase the password for Mercedes-Benz engine and gearbox within 3S.11. Add the function of calculating the password for the for Mercedes-Benz key within 1 minute.Launch X-Prog 3 Supported Chip Brands:It supports common mainstream E U MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.Supported EEPROM Brands: It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.XPROG3 Operation Connection: Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host Connection method 3: After removing the E U from the car, connect the anti-theft E U pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft E U and the diagnostic host. FAQ: Q1: If the X-PROG 3 can reset the ELV (electric steering column lock) on the Mercedes W169? A1: Yes, it supported Q2: Does Xprog3 support immo program A2: Yes, it does Q3: Whether X-431 PRO V7.0 can work with X-Prog 3? A3: No, it can not, it need work with X431 V 8inch and above X431 Scanner. LAUNCH X431 X-PROG 3 Car Key Programmer Immobilizer Key programmer tool Smart Keys Remote For X431 V PLUS X431 PROS X431 PRO3S+ Introduction: X431 X-PROG 3 Vehicle Immobilizer Programmer Key programmer tool, 2021 Year newly launched X-431 G upgraded Immobilizer Programmer product . It is a powerful chip reading,matching and writing programmer. It is suitable for professional users in the automotive electronics industry/locksmith/maintenance shop. HIGHLIGHTS 1. It can be used with a variety of LAUNCH X-431 products, no need to bind, flexible to use, and a wide range of adaptations 2. Integrated multi-function module, one machine with multiple functions, high cost performance 3. Powerful functions, support Mercedes-Benz Infrared keys reading and writing, BMW engine ISN code reading, BENCH mode reading engine and other functions and more 4. Reading and writing data is fast and accurate X-PROG 3 Working Car brands: Volkswagen, Audi, Skoda, Seat, BMW, Mercedes-Benz, Toyota, and more models continue to be updated... X-PROG 3 Working Vehicle systems: Engine system, automatic transmission, instrument system, CAS, body system, lock system, etc. X-PROG 3 Powerful Functions List： EEPROM read and write Key read and write special key generation on-board MCU read and write BMW engine ISN code reading Benz key BMW CAS4+, FEM chip read and write Key Simulator Audi 5th generation steering column chip reading and writing Volkswagen's fourth-generation meters are lost OBD reads MED17 engine Read engine in BENCH mode Volkswagen fourth-generation UDS engine replacement Boot mode read engine Volkswagen MQB engine, gearbox, steering column lock replacement Volkswagen four-generation free accounts are all lost Mercedes-Benz engine gearbox wipe empty function Transmission data reading Working With LAUNCH Products here(could not work alone) Apply for launch x431 ：X431 DIAUN V/ X431 PO MINI/X431 V/V+/PRO3S+/PAD V /PAD III etc. X-PROG 3 can be arbitrarily matched with a variety of X -431 product use, no need to bind, flexible use, stable and reliable product. Working ECU MCU : (over 1000kinds model,Updating.....) Atmel NSC Fujitsu Philips Infineon Renesas M16 MC68HC05 Renesas M32 MC68HC08 Renesas M32R MC68HC11 Renesas R32C MC68HC12 Renesas R8C MediaTek Renesas V850 SPI MicroChip Renesas V850 UART Nordic Samsung ST SiLabs Working EEPROM : (over 1000kinds model,Updating.....) 4Wire GI Numonyx SST AdestoGigaDeviceOKI ST AKM Grundig ONSemi Toshiba Altera HOLTEK Other Winbond Amic Hynix PCTXicor Atmel I2C PhilipsxUSSR BOSCH ITT PioneerYMC Catalyst KHIC PMC Spansion Chingis Macronix Ramtron SPI Dallas/Maxim MicroChip Rohm NEC EON Micron Samsung NSC ESMT MicroWire Seiko Ford EXEL Mitsubishi Siemens Fujitsu Fairchild Motorola Sony X-PROG3 parameter Interface: DB26, DB15 Input voltage: DC12V Input current: 500mA Working temperature: 0-50℃ Storage temperature: -20-70℃ X-PROG3 Dtails&Functions: 1. Car key slot --------- Place the car key to perform the key matching function 2.DB26 --------- Connect to various anti-theft wiring harnesses, such as the data collection line for the fourth generation of instrument keys, etc. 3. Mercedes-Benz key infrared slot --------- Place the Mercedes-Benz infrared key to perform the key matching function 4. Car key chip hole --------- Place the key chip to perform key matching 5. Status indicator --------- Power indicator 6.DIY slot --------- Connect the anti-theft ECU pin through the cable to read and write data 7. Locker Install chip burning socket --------- Complete EEPROM or MCU data read and write operations 8.DC12V power supply --------- Connect DC12 power supply 9.DB15 --------- Connect the main wiring X-PROG3 Packing list: • Main unit • Power adaptor • Main diagnostic cable • The fourth-generation data acquisition cable • The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard) • BENCH mode cable • MCU converter V1 • MCU converter V2 • MCU cable with multiple leads • EEPROM chip adaptor • Benz infrared analog acquisition key How to use X-PROG3 to read and write data? Method 1: use main cable to connect car OBD2 16pin interface, and X-PROG3,with LAUNCH X431 Tablet to do key matching, data reading and writing, etc. Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host Specification Interface DB26, DB15 Input Power DC12V Working CurrentMax 500mA Power Consumption 5W Storage Temperature -20℃~70℃ Working Temperature 0℃~50℃ Size 228*120 mm PaymentDelivery detailsTerms of salesAbout usContact usPayment1.We accept Credit cards、Debit card、Apple Pay、Google Pay etc.payment. 2.Please contact us if you need to use another method to pay. 3.Payment should be made within 4 days after bidding ends. 4.Otherwise an Unpaid Item case will be opened to you. 5.We are not responsible for buyers’ local taxes. 6.Please include your special requests in eBay note if there is any. 7.We reserve the final right of sellingDelivery details Shipping Order will be shipped within 1 business day after payment confirmed. We have warehouse in USA，UK，HongKong，Australia，Russian，Germany and China warehouse. From our US/UK/RU/DE/AU warehouse via USPS UPS or DHL eCommerce shipping Delivery time varies from 2 to 6 business days. From our China warehouse via UPS DHL or Fedex Delivery time varies from 5-12 business days. We will ship according to your payment address. Please make sure it is correct and include phone number for delivery. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem. Please include your special requests in eBay note if there is any.Terms of salesWe are authorize distributor, our all items are 100% original and Our devices have warranty, 12 months free repair for the devices. 3 months for the accessories.Please contact us firstly when you need warranty service.In case an item arrives faulty, please contact us in 30 days and keep it unused.We will instruct you on how to return and get refund or replacement.If after 30 days, or the item has been used, we have the right to decline your claim.Items should be returned on buyers' cost for repair or replacement. About usWho We Are? We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands, and more brands will be show in our store in near future. What Do We Have? We have office and warehouse in Australia and US to ensure fast shipment and after-sale service. We have more than 50 employees devoting to customer satisfaction. Terms of tax: We are not responsible for buyer's local taxes, please consult your local Customs for tax details. Contact usOur customer-oriented service strives for positive feedbacks with all 5 star selling ratings. Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case. We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday.

Price: 529 USD

Location: Perth Amboy, New Jersey

End Time: 2024-04-23T09:08:40.000Z

Shipping Cost: N/A USD