Larson Electronics HAL-24-2L-LED-BMSW Hazardous Location LED Pivoting Light

Description: Larson Electronics HAL-24-2L-LED-BMSW Hazardous Location LED Pivoting Light, Offshore Rig Light, 2 Lamp, Class 1, Division 2, 2'UL 844; Class 1 Division 2 Groups A,B,C,D; UL 1598A marine; cUL listed for Canada; T4 Temp; Meets USCG specs2 LED Lamps, 28 Watts, 2,750 Lumens, T4A Temperature Rated, 5600K Color Temperature, 50,000 Hour Lamp Life ExpectancyBack Mount Swivel Bracket, 3/4 Inch Threaded Wiring HubUniversal Voltage: 120-277V AC, 50/60Hz, Including: 120V, 220V, 240V, 277V ACAluminum housing, acrylic lens, high output LED lamps, swivel mounting bracket This hazardous area LED light is U.S./Canada U.L. approved Class 1 Division 2, has a T4A temperature rating, and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. This 2 foot long, 2 lamp hazardous location LED light takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture comes standard with our 14 watt LED lamps that are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs. The light is weatherproof and provides operators in hazardous locations with a highly efficient, reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight, increases lamp life to an extreme 50,000 hours and helps this LED fixture maintain a T4A temperature rating. This fixture is universal voltage capable (not multi-tap) and operates on a range of voltages from 120 to 277 volts AC 50/60 Hz. This LED light fixture is U.S. and Canada U.L. approved. The light fixture mounts via two L shaped swiveling brackets. The angle of the bracket is set by tightening the nut and bolt on each bracket. The bolt and lock washer act as a set screw, securing the fixture in place once the position is set. The bracket itself is mounted via a single 3/8” bolt hole at the top the bracket. Once the brackets are mounted to a flat surface, the fixture can be pivoted by loosening the nut and bolt that hold the bracket to the fixture. This fixture allows 45 degrees of pivot from the 90 degree point.Specifications for this itemBase MaterialCopper Free AluminumBody MaterialCopper Free AluminumBrand NameLarson ElectronicsCurrent TypeAcEnclosureSheet AluminumHeight8.65 inchesInput Power28 wattsInput Voltage120 volts

Price: 395 USD

Location: La Crosse, Wisconsin

End Time: 2023-11-23T17:14:28.000Z

Shipping Cost: 0 USD