Kyosho Wave Chopper 2.0 1:6 R/C Electric Powered (BLUE) [40211T2]

Description: Kyosho Wave Chopper 2.0 1:6 R/C Electric Powered (BLUE) [40211T2] KYOSHO WAVE CHOPPER 2.0 ELECTRIC WATERCRAFT TYPE 2 (BLUE) W/SYNCRO KT-231P 2.4GHZ RADIO, BATTERY & CHARGER 40211T2 The Kyosho Wave Chopper 2.0 Type 1 Electric Personal Water Craft brings fun to the water with the revival of the Wave Chopper! Originally released in 2001, the Wave Chopper 2.0 features modern RC technology and performance. A redesigned rudder, stern tube and motor mount in the 1/6th hull, and an updated rider figure are combined with the latest RC components to take this model into the next generation. Optimal torque from the G14L water cooled 550 class motor works perfectly with the large capacity Kyosho Speed House KA60-91W speed controller to deliver crisp acceleration and racy performance while reducing heat loss. Styrene floats provide buoyancy that make the hull unsinkable, even if it is not completely waterproof. The hull and rider are pre-assembled, so all you need to do is install four AA batteries (sold separately) into the transmitter, charge the included NiMH battery, and mount the rider figure to get this model fully ready to run. KYOSHO WAVE CHOPPER 2.0 Features: Kick up rudder protects both the rudder and hull from unexpected contact and delivers smooth turning performance Built in water intake channels water into the cooling jacket on the motor for effective cooling Optimal angle of the stern tube along the bottom of the hull reduces drive resistance allowing the fully submerged propeller to generate quick and smooth acceleration Pre-installed 550 class G14L motor is fitted with a water cooling system to prevent heat loss High rigidity suspended motor mount maximizes drive efficiency and easy maintenance 7.2V 2200mah battery and USB delte peak charger are included with the pre-assembled hull and 2.4ghz transmitter Specifications: Length: 595mm Width: 220mm Height: 350mm Weight: 1,600g approx. Transmitter: KT-231P+ ESC: KYOSHO SPEED HOUSE KA060-91W Servo: KS4031-06W Motor: 550-class G14L motor with water-cooling jacket Battery: 7.2V-2200mAh NiMH Compatible battery size: 148x52x30mm or less (LxWxH) Charger: Ni-MH battery dedicated USB charger Propeller: D31xP1.4 (Polycarbonate) Maximum speed: 24km/h approx. Operation time: 5 min approx. Includes: Fully assembled hull Syncro KT231P+ transmitter Injection molded boat stand Pre painted figure Hex wrenches 1.5 & 2.5mm Spanner 4.0 & 5.5mm Antenna tube 7.2V 2200 mAh Ni-MH battery and USB delta peak charger PVC tape for waterproofing Needed to Complete: (4) AA batteries for transmitter Kyosho Wave Chopper 2.0 1:6 R/C Electric Powered (BLUE) [40211T2] KYOSHO WAVE CHOPPER 2.0 ELECTRIC WATERCRAFT TYPE 2 (BLUE) W/SYNCRO KT-231P 2.4GHZ RADIO, BATTERY & CHARGER 40211T2 The Kyosho Wave Chopper 2.0 Type 1 Electric Personal Water Craft brings fun to the water with the revival of the Wave Chopper! Originally released in 2001, the Wave Chopper 2.0 features modern RC technology and performance. A redesigned rudder, stern tube and motor mount in the 1/6th hull, and an updated rider figure are combined with the latest RC components to take this model into the next generation. Optimal torque from the G14L water cooled 550 class motor works perfectly with the large capacity Kyosho Speed House KA60-91W speed controller to deliver crisp acceleration and racy performance while reducing heat loss. Styrene floats provide buoyancy that make the hull unsinkable, even if it is not completely waterproof. The hull and rider are pre-assembled, so all you need to do is install four AA batteries (sold separately) into the transmitter, charge the included NiMH battery, and mount the rider figure to get this model fully ready to run. KYOSHO WAVE CHOPPER 2.0 Features: Kick up rudder protects both the rudder and hull from unexpected contact and delivers smooth turning performance Built in water intake channels water into the cooling jacket on the motor for effective cooling Optimal angle of the stern tube along the bottom of the hull reduces drive resistance allowing the fully submerged propeller to generate quick and smooth acceleration Pre-installed 550 class G14L motor is fitted with a water cooling system to prevent heat loss High rigidity suspended motor mount maximizes drive efficiency and easy maintenance 7.2V 2200mah battery and USB delte peak charger are included with the pre-assembled hull and 2.4ghz transmitter Specifications: Length: 595mm Width: 220mm Height: 350mm Weight: 1,600g approx. Transmitter: KT-231P+ ESC: KYOSHO SPEED HOUSE KA060-91W Servo: KS4031-06W Motor: 550-class G14L motor with water-cooling jacket Battery: 7.2V-2200mAh NiMH Compatible battery size: 148x52x30mm or less (LxWxH) Charger: Ni-MH battery dedicated USB charger Propeller: D31xP1.4 (Polycarbonate) Maximum speed: 24km/h approx. Operation time: 5 min approx. Includes: Fully assembled hull Syncro KT231P+ transmitter Injection molded boat stand Pre painted figure Hex wrenches 1.5 & 2.5mm Spanner 4.0 & 5.5mm Antenna tube 7.2V 2200 mAh Ni-MH battery and USB delta peak charger PVC tape for waterproofing Needed to Complete: (4) AA batteries for transmitter × × × × Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like Rear Arm Pivot Pin (2) Xray 367320 Protoform VTA Rear Tires 31mm Mounted White Wheels (2) [PRM1013917] MIP Wrench Set 1.5mm, 2.0mm, 7.0 Nut Driver [9520] Kimbrough Products 113 23 Spline Servo Saver for KO/Airtronics/JR Servos (1) Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Beachline Raceway Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Seller will pay for return shipping. eBay integration by

Price: 248.95 USD

Location: Cocoa, Florida

End Time: 2024-08-16T16:24:43.000Z

Shipping Cost: 0 USD