JTAG HS2 FPGA Downloader w/Micro-AB USB2 Interface Debugger Programmer 410-249

Description: Description Multifunctional JTAG HS2 FPGA Downloader with Micro-AB USB2 Interface Debugger Programmer 410-249 for Digilent/Xilinx Description: - JTAG-HS2 programming wire is a high-speed programming solution designed for Xilinx FPGA. The wire is fully compatible with all tools for Xilinx and can be driven seamlessly by software for iMPACT, ChipScope and EDK. The JTAG-HS2 programming wire can be connected to the target board in the following two ways: For Digilents 6-pin, 100mm spacing programming connector. For Xilinx 2X7, 2mm connector with attached adapter. - The PC powers the JTAG-HS2 through a USB port. When the JTAG-HS2 is connected to a PC, the PC will automatically recognize it as a Digilent programming wire, even if the wire is not connected to the target board. JTAG-HS2 has a separate VDD pin to provide JTAG signal buffering. All JTAG signals use 24 ma high-speed tri-state buffers, supporting signal voltages from 1.8V to 5V and bus speeds of up to 30 megabits/SEC. To ensure proper operation, the VDD pin voltage of the JTAG-HS2 must be consistent with the voltage driving the JTAG port on the FPGA. - When a JTAG signal is available at high electrical impedance, the JTAG bus can be shared with other devices (unless the JTAG bus is actively driven during programming). The JTAG-HS2 product comes with A Type-A to micro-USB cable that can be connected to the module end on the opposite side of the motherboard connector to ensure that the small and light JTAG-HS2 can be securely connected to the motherboard connector. Precaution: - Due to the built-in functionality of this module on all Digilent FPGA development boards, it is not necessary for Digilent FPGA development boards to use this module. Product Data: - Processor/IC: for Analog Devices ADP123AUJZ Linear voltage regulator - Connector: USB2 Micro-AB - Programming: support all programming tools for Xilinx. It is fully compatible with Digilent Adept software and Adept SDK Product Features: - Analog Devices ADP123AUJZ Linear voltage regulator - For Xilinx FPGA JTAG programming/debugging solution with small size, complete function and multifunctional integration - Compatible with all tools for Xilinx - Compatible with IEEE 1149.7-2009 Class T0-Class T4 (including 2-wire JTAG) - Independent reference voltage to drive JTAG signal voltage; The reference voltage can be between 1.8V and 5V - High-speed USB2 interface that can drive the JTAG/SPI bus at up to 30Mbit/SEC - The JTAG/SPI frequency can be set by the user - The Micro-AB USB2 interface is used - SPI programming solution (up to 30Mbit/ SEC after classes in modes 0 and 2, up to 2Mbit/ SEC in modes 1 and 3) - Fully compatible with Digilent Adept software and Adept SDK to create custom JTAG/SPI applications Package Included: - 1 x Debugger Module - 1 x USB Cable Payment Terms 1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc. 2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Shipping Terms 1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email. 2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding. Return Terms If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund. Custom Duties & Taxes 1. It is buyers responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers. 2. Please check with your countrys customs office and inform us what/how much should declare before shipping. Feedback 1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap. 2. If you are dissatisfied for any reason, please dont be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. On Jul 15, 2024 at 04:54:53 PDT, seller added the following information:

Price: 97.85 USD

Location: Shenzhen

End Time: 2024-09-15T07:31:26.000Z

Shipping Cost: 2.99 USD