Interlux VC Performance Epoxy Bottom Finish

Description: Interlux VC Performance Epoxy Bottom Finish | V127KITG Product Description: Sold as kit Makes 2 Gallons.VC Performance is a fluoro microadditive bearing two-part epoxy for use on the underwater surfaces of high performance boats. Apply to gelcoat, bare fiberglass, epoxy and primed metal surfaces. Dries to a hard, somewhat slippery, semi-gloss white finish that is ideal for wet sanding and burnishing. The hard, stain-resistant finish is also ideal for rack-stored and trailered boats or boats that are kept in the water (not requiring antifouling properties). VC Performance has no antifouling or foul release properties.Specifications:Finish: Semi-glossMix Ratio: 1 : 1 by volumeNumber of Coats: 3-4 as neededCoverage: 199.9 ft²/gal by sprayInterlux Reducing Solvent: Thinner; thin, if necessary, after induction *****WILL SHIP TO CONTINENTAL 48 STATES GROUND ONLY****How To Apply APPLICATION DATA METHOD: Airless Spray, Brush, Conventional Spray, Roller- Pressure Pot or Siphon Cup NUMBER OF COATS: 3-4 DRY FILM THICKNESS PER COAT: 3.6 mils COVERAGE: 200 sq. ft/gal. APPLICATION TEMP: 50°F Min. / 95°F Max. THINNER: Reducing Solvent 2316NDRY TIMES:TempTo TouchTo RecoatPot LifeTo Launch95°F2 HR4 HR4 HR3 DAY73°F2 HR5 HR5 HR4 DAY50°F3 HR6 HR6 HR7 DAYNote: Maximum Immersion Times are as follows: 10-35°C/50-95°F - 60 daysBARE FIBERGLASS: Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water. Wipe with Fiberglass Solvent Wash 202. Sand with 80 grade (grit) paper. Wipe with Fiberglass Solvent Wash 202. BARE METAL: Sandblast or grind to bright metal finish. Immediately apply Viny-Lux Primewash 353/354 thinned 25% with Viny-Lux Solvent 355. Allow to dry for 1-24 hours. CLEAR EPOXY: Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water. Wet sand with 80 grade (grit) paper. Wash down with fresh water. Wipe with Fiberglass Solvent Wash 202. APPLICATION INFORMATION: Apply 3 coats of VC Performance Epoxy. VC Performance Epoxy is designed for spray application but can be applied by brush and rollers. Mix base and curing agent thoroughly at the specified ratio. Allow 45 mins at 50°F/10°C and 30 mins above 77° F/25°C for induction. Thin, if necessary, after induction. Airless Spray Pressure: 142-170 bar/2100-2500 psi Tip Size: 0.48-0.53 mm/19-21 thou. Conventional Spray Pressure Pot: Pressure: 3.44-4.08 bar/50-60 psi - gun pressure; 8-15 psi pot pressure. Tip Size: 1.4-1.5 mm/55-60 thou. Siphon Cup: Pressure: 3.06-4.08 bar/45-60 psi. Tip Size: 1.4-1.5 mm/55-60 thou. Other If fairing is necessary, use Interprotect Watertite between 1st and 2nd coats of VC Performance Epoxy and then apply 3 coats of VC Performance Epoxy over the Interprotect Watertite. VC Performance Epoxy can be applied to gelcoat, bare fiberglass, epoxy and properly primed metal. Apply to clean, dry, properly prepared surfaces only. VC Performance Epoxy can only be applied over two component products that are specified for underwater use. If there is any single paint (such as antifouling paint) on the surface, it must be removed and then proceed as with bare surface. About UsWholesale Marine is an on line boating store founded to provide customers an easy way find top-quality products at the lowest prices. With associates who possess decades of combined boating experience, Wholesale Marine can truly provide expert customer service. Wholesale Marine ships products on the same day and does not charge sales tax on 49 of 50 states. Please let us know if you have any suggestions on how we can serve you better. Shipping MethodWholesale Marine currently ships all merchandise UPS or truck freight. All orders with in-stock items placed by 2:00 PM EST Monday - Friday are shipped that same day. Orders placed after 2:00 PM on Friday and orders place on Saturday and Sunday will ship on the following Monday. Orders that qualifying for free shipping may be shipped any method and carrier chosen by Wholesale Marine. Free shipping offers are only valid within the continental U.S. There are certain items that we cannot ship outside of the Continental United States. Items that cannot be shipped outside of the Continental United States include all name brand watersports products and hazardous materials, such as but not limited to paint, oil, resins and adhesives. *Canadian Customers: Please be aware that any brokerage, duty, or customs fees are out of our control. Combining OrdersWe will absolutely combine orders for a reduced shipping rate. There are just four simple steps to follow: Click to commit to the items which you are interested in. Before you pay, send us an invoice request. We will then send you a revised copy of the invoice with the combined shipping rate. Pay ReturnsWholesale Marine will gladly refund or exchange almost any merchandise within 30 days from original purchase date. To return just send merchandise prepaid, in its original unused condition. Please include a copy of original Wholesale Marine invoice. We will then refund the merchandise amount by the original payment method. Shipping costs are not refundable. No returns for special order items, electronics, cut lengths of material or hazardous materials, such as but not limited to paint, oil, resins and adhesives. Please ship all Returns to: Wholesale Marine 147 Circle Freeway Drive Cincinnati, OH 45246 Connect with Us Find us on:

Price: 257.99 USD

Location: Cincinnati, Ohio

End Time: 2025-01-07T17:24:31.000Z

Shipping Cost: 0 USD