Inner Cam Bearing Puller + Install Tools for Harley Twin Cam 88 1999-2006

Description: 100% Made in USA Highest QualityFast Shipping Inner Cam Bearing Puller + Install Tools for Harley Twin Cam 88 1999-2006 Fast Ship Inner Cam Bearing Puller and Installation Tools Designed for Twin Cam and Dyna models. Will work on all TC88 that use the B148 (AKA I.D. 0.88") bearings. This set will remove and install the inner cam bearings on the older model Twin Cams and Dyna Harleys. We also have new Torrington-Koyo B-148 bearings available in our store ! This set includes our Improved collet design. The design sold by others has the whole back of the collet threaded with two slots cut into the threads for turning a wrench on. It's simple, it's cheap, and it's bad. Use that design once or twice, and you may damage the threads where the wrench makes contact, requiring you to now clean up those threads before you can even get the nut off the collet and use it again. We've worked around this issue by moving the threads up on the collet to allow for a more controlled grip and protection of threads. We've also completely redesigned the installer plate, zeroing in on the correct hole placement by taking apart an engine and putting it on a digital drafting table to get the precise placement of all of the important dimensions. This set also includes our Patent Pending window modification to the installer plate. You paid too much for the bike and the tools to end up cracking the engine case because you can't see the bearing! With the redesign, you will never again have to squint through a tiny hole with a flash light! Instructions are available for this set, please send us an eBay message if you would like to get a copy of the instructions emailed! 100% Made in the United States. ***Tool Comes with Black Oxide Coating For Years of Use *** ***A higher quality tool than the competition*** We offer USPS or UPS shipping. Choose which ever you prefer! US Tracking will be provided with both options! We Ship Internationally! Payment Shipping ReturnsWe accept payment by any of the following methods: PayPal! Pay now for fast Shipping! We offer COMBINED shipping on all orders! Your order will be sent within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it within one to four business days. In the very unlikely event that your item is lost or damaged on its way to you, then WE are responsible and will issue either a full refund or replacement.If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. See our other items100% Made in USAHighest QualityFast ShippingInner Cam Bearing Puller and Installation Tools Designed for Twin Cam and Dyna models. Will work on all TC88 that use the B148 (AKA I.D. 0.88") bearings. This set will remove and install the inner cam bearings on the older model Twin Cams and Dyna Harleys. We also have new Torrington-Koyo B-148 bearings available in our store ! This set includes our Improved collet design. The design sold by others has the whole back of the collet threaded with two slots cut into the threads for turning a wrench on. It's simple, it's cheap, and it's bad. Use that design once or twice, and you may damage the threads where the wrench makes contact, requiring you to now clean up those threads before you can even get the nut off the collet and use it again. We've worked around this issue by moving the threads up on the collet to allow for a more controlled grip and protection of threads. We've also completely redesigned the installer plate, zeroing in on the correct hole placement by taking apart an engine and putting it on a digital drafting table to get the precise placement of all of the important dimensions. This set also includes our Patent Pending window modification to the installer plate. You paid too much for the bike and the tools to end up cracking the engine case because you can't see the bearing! With the redesign, you will never again have to squint through a tiny hole with a flash light! Instructions are available for this set, please send us an eBay message if you would like to get a copy of the instructions emailed! 100% Made in the United States. ***Tool Comes with Black Oxide Coating For Years of Use *** ***A higher quality tool than the competition*** We offer USPS or UPS shipping. Choose which ever you prefer! US Tracking will be provided with both options! We Ship Internationally! Inner Cam Bearing Puller + Install Tools for Harley Twin Cam 88 1999-2006 Fast Ship Inner Cam Bearing Puller and Installation Tools Designed for Twin Cam and Dyna models. Will work on all TC88 that use the B148 (AKA I.D. 0.88") bearings. This set will remove and install the inner cam bearings on the older model Twin Cams and Dyna Harleys. We also have new Torrington-Koyo B-148 bearings available in our store ! This set includes our Improved collet design. The design sold by others has the whole back of the collet threaded with two slots cut into the threads for turning a wrench on. It's simple, it's cheap, and it's bad. Use that design once or twice, and you may damage the threads where the wrench makes contact, requiring you to now clean up those threads before you can even get the nut off the collet and use it again. We've worked around this issue by moving the threads up on the collet to allow for a more controlled grip and protection of threads. We've also completely redesigned the installer plate, zeroing in on the correct hole placement by taking apart an engine and putting it on a digital drafting table to get the precise placement of all of the important dimensions. This set also includes our Patent Pending window modification to the installer plate. You paid too much for the bike and the tools to end up cracking the engine case because you can't see the bearing! With the redesign, you will never again have to squint through a tiny hole with a flash light! Instructions are available for this set, please send us an eBay message if you would like to get a copy of the instructions emailed! 100% Made in the United States. ***Tool Comes with Black Oxide Coating For Years of Use *** ***A higher quality tool than the competition*** We offer USPS or UPS shipping. Choose which ever you prefer! US Tracking will be provided with both options! We Ship Internationally! PaymentWe accept payment by any of the following methods: PayPal! Pay now for fast Shipping! Shipping We offer COMBINED shipping on all orders! Your order will be sent within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it within one to four business days. In the very unlikely event that your item is lost or damaged on its way to you, then WE are responsible and will issue either a full refund or replacement. ReturnsIf you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. See our other items100% Made in USAFast ShippingHighest QualityInner Cam Bearing Puller and Installation Tools Designed for Twin Cam and Dyna models. Will work on all TC88 that use the B148 (AKA I.D. 0.88") bearings. This set will remove and install the inner cam bearings on the older model Twin Cams and Dyna Harleys. We also have new Torrington-Koyo B-148 bearings available in our store ! This set includes our Improved collet design. The design sold by others has the whole back of the collet threaded with two slots cut into the threads for turning a wrench on. It's simple, it's cheap, and it's bad. Use that design once or twice, and you may damage the threads where the wrench makes contact, requiring you to now clean up those threads before you can even get the nut off the collet and use it again. We've worked around this issue by moving the threads up on the collet to allow for a more controlled grip and protection of threads. We've also completely redesigned the installer plate, zeroing in on the correct hole placement by taking apart an engine and putting it on a digital drafting table to get the precise placement of all of the important dimensions. This set also includes our Patent Pending window modification to the installer plate. You paid too much for the bike and the tools to end up cracking the engine case because you can't see the bearing! With the redesign, you will never again have to squint through a tiny hole with a flash light! Instructions are available for this set, please send us an eBay message if you would like to get a copy of the instructions emailed! 100% Made in the United States. ***Tool Comes with Black Oxide Coating For Years of Use *** ***A higher quality tool than the competition*** We offer USPS or UPS shipping. Choose which ever you prefer! US Tracking will be provided with both options! We Ship Internationally!

Price: 109.99 USD

Location: Franklin Park, Illinois

End Time: 2023-11-19T17:12:24.000Z

Shipping Cost: 0 USD