IK Multimedia iRig Pro Quattro I/O Domestic genuine product Condition very good

Description: Item descriptionProfessional mobile studio. Have you ever lost a cable or connector during a shoot? Don't let technical issues ruin your recording before, during, or even after the shoot.The iRig Pro Quattro I/O, a professional 4 IN / 2 OUT portable audio MIDI interface, is the answer to those concerns.From field recording and content creation to streaming, podcasting, and other distribution, iRig Pro Quattro I/O can be used for a wide range of purposes without complicated wiring.■Multiple functions condensed into a compact body The iRig Pro Quattro I/O is a 4 IN / 2 OUT mobile audio/MIDI interface equipped with a high-quality microphone preamplifier and 24-bit / 96 kHz converter. . The package includes everything you need, including cables, stand adapters, and batteries, so you can start recording at broadcast quality right away.Also available is the iRig Pro Quattro I/O Deluxe, which includes the original iRig MIC XY, windscreen, power adapter, and carrying case. 1) Displays input/output levels, remaining battery power, and phantom power on/off 2) Turns on/off the built-in MEMS microphone 3) Input gain 4) Switches between MULTI, STEREO, and MONO 5) Connects to host device, Displays MIDI input/output 6) Headphone output level 7) Line output level 8) Direct monitor function ON/OFF 9) Loopback function ON/OFF 10) Limiter ON/OFF 11) MIDI IN/OUT 12) Headphone output Terminal 13) 3.5 mm stereo line output terminal 14) Balanced XLR output terminal 15) RCA line input terminal 16) 3.5 mm stereo line input terminal 17) Phantom power ON/OFF 18) Mic/line input compatible XLR combo input terminal 19 ) 9V power adapter connection terminal 20) Power switch 21) USB mobile battery connection terminal 22) Host device connection terminal 23) Microphone / Hi-Z compatible XLR combo input terminal 24) UNC 1/4-20 adapter■Suitable for all uses (as a mobile interface) - Connects to desktops, laptops, and mobile devices - Multi-channel interface that supports up to 24-bit / 96 kHz - Connects MIDI compatible devices to MIDI IN / OUT - Full range of input/output terminals - 4 IN / 2 OUT interface/mixer - MFi certification for seamless performance with iPhone and iPad (as a distribution interface) - STEREO mode to mix all signals into stereo - Compatible with monaural only - MONO mode compatible with streaming apps - Headphone output compatible with direct monitoring that can be turned on/off - Loopback function - Connect a microphone or line-level instrument to Inputs 3-4, and send the signal processed by the app to Channel 1 -2 (Loopback+ function) Turn your iOS/Android device into a multifunctional field recorder Record directly to your mobile device or Mac/PC instead of an ISD card Built-in IDSP-controlled MEMS microphone Recording is also possible - Powered by 4 AA batteries, USB mobile battery - IDeluxe bundle includes iRig MIC XLR combo input terminal with 48V phantom power ・Powered by USB battery, 9V power adapter, or 4 AA batteries ・Mix multiple signals with extensive input/output ・Input multiple sound sources to digital single-lens camera Includes UNC 1/4-20 adapter■Main features・Professional mobile audio MIDI interface ・Connects to iPhone, iPad, Android, Mac/PC ・Converter supporting resolution up to 24-bit / 96 kHz ・Mic/Hi-Z compatible XLR combo input x 2, mic/line Input Support: 2 x XLR combo inputs (both with +48V phantom power), 2 x RCA line inputs, 3.5 mm stereo line input, built-in MEMS microphone, 2 balanced XLR outputs, headphone output (supports direct monitoring) 3.5 mm stereo line output - MULTI, STEREO, MONO modes - Works as a standalone mixer - Built-in limiter and -12 dB safety channel - USB bus powered, 4 AA batteries, 9V power adapter (iRig PSU 9175) ), powered by USB battery, bundled with high-quality software■System requirements・Mac OS 12 mini, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE (2nd generation), iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Pro 10.5-inch, iPad Pro 12.9-inch (1st, 2nd generation), iPad Pro 9.7-inch, iPad Air (2nd generation) 3rd generation), iPad Air 2, iPad Air, iPad mini (5th generation), iPad mini 4, iPad mini 3, iPad mini 2, iPad (5th, 6th, 7th, 8th generation), iPod touch ( Compatible with all models of the latest iPhone, iPad, and iPod touch, including 7th generation), iPod touch (6th generation), and iOS 7.0 or later. - Model running Android 5 or later and equipped with USB audio function■Microphone input 1-2・Balanced XLR x 2 (Pin 1: Ground/Pin 2: Hot/Pin 3: Cold)・Input impedance: 1 kΩ・Input level @ minimum gain setting: -1.5 dBu signal input to XLR terminal 0 dBFS, input level @ maximum gain setting: 0 dBFS with -55 dBu signal input to A) @ Minimum gain setting/phantom power: 48V / -4V■Built-in microphone type: MEMS・Directivity: Omnidirectional・Frequency response: 30 Hz to 20 kHz・Maximum SPL: 110 dB SPL・Sensitivity: -41.5 dB (1 kHz, 94 dB SPL)■Instrument input 1-2・Unbalanced, Hi-Z, TS 1/4 inch terminal x 2 (Tip: Signal/Sleeve: Ground)・Input impedance: 1 MΩ・Input level @ minimum gain setting: To TS terminal 0 dBFS with +10 dBu signal input, input level @ maximum gain setting: 0 dBFS with -43 dBu signal input to TS terminal, frequency response: 7 Hz? 46 kHz (±3 dB) @ 96 kHz, minimum gain setting Dynamic range: 103 dB(A) @ minimum gain setting■Microphone input 3-4・Balanced XLR x 2 (Pin 1: Ground / Pin 2: Hot / Pin 3: Cold)・Input impedance: 1 kΩ・Input level @ minimum gain setting: -3 dBu signal input to XLR terminal 0 dBFS, input level @ maximum gain setting: -54 dBu signal input to XLR terminal, 0 dBFS, frequency response: 10 Hz - 46 kHz (±3 dB) @ 96kHz, minimum gain setting, dynamic range: 101 dB A) @ Minimum gain setting/phantom power: 48V / -4V■Line input 3-4 (balanced)・Balanced TRS 1/4 inch terminal x 2 (Tip: Hot/Ring: Cold/Sleeve: Ground)・Input impedance: 9.2 kΩ・Input level @ minimum gain setting: TRS terminal + 0 dBFS with 17 dBu signal input, input level @ maximum gain setting: 0 dBFS with -35 dBu signal input to TRS terminal, frequency response: 7 Hz? 46 kHz (±3 dB) @ 96 kHz, minimum gain setting, dynamic Range: 100 dB(A) @ minimum gain setting■Line inputs 3-4 (unbalanced), unbalanced TRS 1/8 inch, stereo and RCA terminals, input impedance: 2.1 kΩ, nominal input level: -3.5 dBV (-10 dBV, including 6.5 dB headroom) )・Frequency response: 16 Hz? 46 kHz (±3 dB) @ 96 kHz, minimum gain setting・Dynamic range: 93 dB(A)■Line output 1-2 (balanced) - Balanced XLR x 2 (Pin 1: Ground / Pin 2: Hot / Pin 3: Cold) - Floating - Balanced output, with automatic level correction function in unbalanced mode - Output impedance : 150 Ω (balanced) Output level: 0 dBFS equals +12 dBu Frequency response: 5 Hz to 44 kHz (±3 dB) @ 96 kHz Dynamic range: 100 dB(A) Channel crosstalk : 88 dB(A)■Stereo output (unbalanced) - Unbalanced TRS 1/8 inch - Stereo terminal - Output impedance: 150 Ω - Output level: 0 dBFS is equivalent to +12 dBu - Frequency response: 5 Hz - 44 kHz (±3 dB) @ 96 kHz・Dynamic range: 100 dB(A)・Channel crosstalk: 88 dB(A)■Headphone output - TRS 1/8 inch stereo terminal - Output impedance: 22 Ω - Output level: 26 mW / channel (32 Ω load) - Frequency response: 15 Hz - 44 kHz (±3 dB) @ 96 kHz - Dynamic Range: 100 dB(A)■Common AD/DA conversion: 24 bits Sampling rate: 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz Power source: USB bus power / Dry batteries (AA batteries x 4) / iRig PSU 9175 (sold separately***) / External USB power supply (5VDC, 1A or more) When using this product with an iOS device, a dry battery or AC adapter is required.・Connection terminal for each device: Mini-DIN ・Battery life: Maximum load recording*: 1.5 hours (alkaline batteries) / 3 hours (nickel metal hydride rechargeable batteries) Minimum load playback**: 2.5 hours (alkaline batteries) / 4 hours (nickel metal hydride rechargeable battery) *When connecting 1.6 mA phantom power to each of the four inputs, input gain set to maximum, and 32Ω headphones connected. **When playing music, phantom power is not used, and 32Ω headphones are connected.■iRig Pro Quattro I/O dimensions and weight 166 mm x 92 mm x 43 mm 325 g (excluding battery)■Contents・iRig Pro Quattro I/O main unit・1/4 inch thread・adapter・Lightning to Mini-DIN cable (60 cm)・USB-C to Mini-DIN cable (60 cm)・USB-A to Mini -DIN cable (60 cm), 2.5 mm TRS male to MIDI female adapter (10 cm), 4 AA batteries"For ""remote delivery areas"", additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as ""gifts"". -US and International government regulations prohibit such behavior."

Price: 320 USD

Location: Japan

End Time: 2024-10-19T12:31:42.000Z

Shipping Cost: 0 USD