Human body microwave radar inductive switch stair corridor light control

Description: Product details:1. Control principle:Microwave sensor uses Doppler principle to transmit and receive high-frequency microwave signal (accurately sense the movement and change of objects), and controls the on (on) and off (off) of load lamps through signal amplification and intelligent recognition of MCU program.*Doppler principle, namely radar principle, is widely used in aviation, aerospace and military industry.2. Intelligent sensing:1> When someone (moving object) enters the sensing detection range (within 16m in diameter), the load lamp lights up; When people leave through the sensing detection range and the set delay time countdown ends, the load lamp will automatically turn off.2> When a person enters the sensing detection range and the load lamp is on, if the person stays in the sensing detection range all the time, before the end of the set delay time countdown, as long as the person moves slightly (including the movement of the limbs), the sensor will drive the load lamp on continuously until the person leaves and the set time countdown is over, the load lamp will go out automatically.3. Intelligent recognition:1> To put it simply, this product can be set to turn off the light in the daytime and turn on the light at night when there are people; It can also be set to light up at any time according to the demand.2> This product has a variety of lighting settings, customers can adjust according to their needs, to adapt to the lighting needs of different environmental lighting conditions.3> This product can also set the sensing distance range, within the radius of 1-8m.4. Anti interference:As we all know, there are many different frequency signals in the space (such as 3GHz signal of mobile phone, 2.4GHz signal of WiFi, 433khz signal of TV remote control, acoustic signal, etc.). Some signals are consistent and similar to human body induction signals. Our products can intelligently identify useful induction signals, prevent other interference signals from mistakenly triggering lights, and ensure product reliability. Product parameters:Size: 68 * 41 * 39mmWorking voltage: AC220 ～ 240V, 50 / 60HzLoad power: 600W (resistive load, incandescent lamp and other resistive electrical appliances) / 300W (inductive load, energy-saving lamp and other non resistive electrical appliances, about connecting LED lights and other problems, because LED has a driving power supply, when it is powered on, the instantaneous current is very large, our inductive switch is generally connected to the LED below 100W, there is no problem, if the LED driver board does well, the power can be increased, But in the market, ordinary LED drivers have a large instantaneous current.)Interface: 3-core pluggable port (n, l, l '), 1.5mm2 cableDetection principle: Microwave motion detectionInstallation mode: indoor, wall or ceiling installationHF system: 5.8GHz + / - 75MHz CW radar wave, ISM bandTransmitting power: < 2MWDetection angle: 360 °， one hundred and sixty ° Motion detection: 0.3.., 3 M / S (1... 10 km / h)Distance: 1-8m (radius), adjustableWorking delay: 10 seconds to 12 minutes, adjustableLight control illumination: 5 ~ 2000lux, adjustablePower consumption: close to 0.5WOperating temperature: - 15... + 70 ° CProtection grade: IP20Product weight: 65g Quantity: 1pcs

Price: 14.07 USD

Location: Raleigh, North Carolina

End Time: 2025-01-28T03:47:39.000Z

Shipping Cost: 0 USD