HP/Agilent E4422B/1EM ESG-A RF Signal Generator 250 kHz

Description: HP/Agilent E4422B ESG-A RF Signal Generator 250 kHz - 4 GHz with Option 1EM Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from HP/Agilent and may vary slightly due to upgrades, options, or revisions this unit may or may not have. This unit ships tested and is guaranteed to work for 30-days, parts and labor, excluding freight. The Unit's Display Reads: Model Number: E4422B Serial Number: US38440264 Firmware Revision: B.02.24 Firmware Date: Dec. 18, 1998 Total Hours: 49530.8 (may vary slightly due to testing) Total Hours Display Has Been On: 22033.1 (may vary slightly due to testing) Total Power Cycles: 447 (may vary slightly due to testing) Total Attenuator Cycles: 328650 (may vary slightly due to testing) Option Description: 1EM: EXT 1 Input Connecter relocated to rear panel, female BNC connector. Key Features: 250 kHz to 4.0 GHz Flexible architecture, upgrade paths for options 4 GHz electronic attenuator for reliability and repeatibality Superior level accuracy Wideband FM and Phase Modulation, AM and Pulse Modulation Step sweep (frequency, power and list) Built-in function generator Customer Installable Upgrade Description: The ESG-A series of analog RF signal generators offers excellent in-channel performance with superior quality and reliability, at an affordable price. The first in a new generation of signal generators, they provide excellent frequency and level control, and wide modulation capabilities. They are ideally suited to meet the demanding requirements of today's receiver test, component test and local oscillator applications. Frequency Specifications: Range: 250 kHz to 4 GHz Underrange: 100 kHz Resolution: 0.01 Hz Accuracy: Same as timebase Sweep Modes Specifications: Operation Modes: Step: frequency and power, and arbitrary list Dwell Time: 1 ms to 60 sec Number of Points: 2 to 401 Internal Reference Oscillator Specifications: Time Base Staibility (Standard): Aging Rate: Temperature (0° to 55°C): Line VOltage: Time Base Reference Output: Frequency: 10 MHz Amplitude: > 0.35 Vrms into 50 Ω load External Reference Input: Frequency: 1, 2, 5, 10 MHz ± typ. 10 ppm Amplitude: > 0. 15 Vrms Input Impedance: 50 Ω Output Specifications: Range: 250 kHz to 1000 MHz: +13 to -136 dBm standard (+17 to -136 dBm Option UNB) > 1000 MHz to 3000 MHz: +10 to -136 dBm standard (+16 to -136 dBm Option UNB) >3000 MHz to 4000 MHz: +7 to -136 dBm standard (+16 to -136 dBm Option UNB) Resolution: 0.02 dB Level Accuracy (at 23° ±5°C): 250 kHz to 2 GHz: ±0.5 dB (+7 to -127 dBm), ±1.5 dB (2 GHz to 4 GHz: ±0.9 dB (+7 to -127 dBm), ±2.5 dB (Attenuator Hold Level Range: > 17 dB (> 23 dB Option UNB) Switching Speed: With Power Search Mode: Reverse Power Protection1: 250 kHz to 2000 MHz: 50 watts > 2000 MHz to 4000 MHz: 25 watts Max. DC Voltage: 50 V SWR (Typical): 250 kHz to 2000 MHz: > 2000 MHz to 4000 MHz: Output Impedance: 50 Ω Frequency Bands Specifications: Band: Frequency Range: N#: 1 250 kHz to < or = to 249.999 MHz 1 2 > 249.999 to < or = to 500 MHz 0.5 3 > 500 to < or = to 1 GHz 1 4 > 1 to < or = to 2 GHz 2 5 > 2 to < or = to 4 GHz 4 Spectral Purity Specifications: SSB Phase Noise (typical, at 20 KHz offset): at 500 MHz: at 1000 MHz: at 2000 MHz: at 3000 MHz: at 4000 MHz: Residual FM (CW mode, 0.3 - 3 kHz BW, CCITT, rms): Phase Noise Mode 1: Phase Noise Mode 2: Frequency Modulation Specifications: Maximum Deviation: N x 10 MHz Resolution: 0.1% of deviation or 1 Hz, whichever is greater Deviation Accuracy (1 kHz rate, dev. Modulation Frequency Response (deviation = 100 kHz): Path: Rates: 1 dB Bandwidth: 3 dB Bandwidth, typical: FM1: dc/20 Hz to 100 kHz dc/5 Hz to 10 MHz FM2: dc/20 Hz to 100 kHz dc/5 Hz to 1 MHz Phase Modulation Specifications: Maximum Deviation: N x 90 radians Resolution: 0.1% of set deviation Deviation Accuracy (1 kHz rate): Modulation Frequency Response: ΦM Mode: Maximum Deviation: Rated (3 dB BW): ΦM1: ΦM2: Normal: N x 90 rad dc - 100 kHz dc - 10 kHz High Bandwidth: N x 2π rad N x π/2 rad dc - 1.5 MHz (typ.) dc-4 MHz (typ.) dc - 1 MHz (typ.) dc-0.9 MHz (typ.) Distortion (1 kHz rate, THD, dev Amplitude Modulation3fc > 500 kHz Specifications: Range (envelope peak 0 to 100% Resolution: 0.1% Rates (3 dB bandwidth): dc/10 Hz to 10 kHz Distortion (1 kHz rate, THD): 30% AM: Accuracy (1 kHz rate): Pulse Modulation Specifications: On/Off Ratio: 80 dB; > 3 GHz: > 60 dB Rise/Fall Times: 150 ns, typical Minimum Width (typical): ALC On: 2 µs, ALC Off: 0.4 µs Pulse Repetition Frequency (typical): ALC On: 10 Hz - 250 kHz ALC Off: DC - 1.0 MHz Level Accuracy (relative to CW)4: ±0.5 dB, typical Internal Pulse Generaotr: Squarewave Rates: 0.1 Hz - 50 KHz Pulse: Period: 16 µs to 30 sec Width: 8 µs to 30 sec Resolution: 4 µs Internal Modulation Source Specifications: Description: Provides FM, ΦM, and AM Modulation Signals and LF Out Waveforms: Sine, square, ramp, triangle, pulse, and noise Rate Range: Sine: 0.1 Hz - 50 kHz Square, Ramp, Triangle: 0.1 Hz - 10 kHz Resolution: 0.1 Hz Pulse Only: 4 µs Frequency Accuracy: 0.005% Swept Sine Mode (Frequency, Phase Continuous): Operating Modes: Triggered or Continuous Sweeps Frequency Range: 0.1 Hz to 50 kHz Sweep Time: 1 ms to 65 sec Resolution: 1 ms Dual Sinewave Mode: Frequency Range: 0.1 Hz to 50 kHz Amplitude Ratio: 0 to 100% Amplitude Resolution: 0.1% LF Out (Internal Modulation Source) Specifications: Amplitude: 0 to 3 Vpeak into 50 Ω Output Impedance: External Modulation Inputs Specifications: Modulation Types: Ext1: FM, ΦM, AM, and Burst Envelope Ext2: FM, ΦM, AM, and Pulse High/Low Indicator (100 Hz to 10 M Hz BW, AC coupled inputs only): Activated when input level error exceeds 3% (nominal) Simultaneous Modulation Specifications: Description: All modulation types may be simultaneously enabled, except: FM with ΦM, AM with Burst Envelope. AM, ΦM and FM can sum simultaneous inputs from any two sources (INT, EXT1, and EXT2). Any given source (INT, EXT1, or EXT2) may only be routed to one activated modulation type. Remote Programming Specifications: Interface: GPIB (IEEE-488.2-1987) with Listen and Talk. RS-232. Control Language: SCPI version 1992.0, also compatible with HP 8656B and 8657A/B/D/J mnemonics Functions Controlled: All front-panel functions except power switch and knobs IEEE-488 Functions: SH1, AH1, T6, TE0, L4, LE0, SR1, RL1, PP0, DC1, DT0, C0, E2 General Specifications: Power Requirements: 90 to 254 V; 50, 60, or 400 Hz; 200 W maximum Operating Temperature: 0 to 55°C Leakage: Conducted and radiated interference levels meets MIL-STD-461B RE02 Part 2 and CISPR 11 Storage Registers: Up to 100 storage registers, up to 10 sequences available Weight: Dimensions: 133 mm H x 426 mm W x 432 mm D (5.25" H x 16.8" W x 17" D) Notes: 1: The reverse power protection circuitry triggers at nominally 1 watt. 2: Specifications apply for FM deviations 3: AM is typical above 3 GHz. 4: With ALC on, specifications apply for repitition rates or = to 5 ms. For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $50.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? 07/27/12

Price: 3174.99 USD

Location: Phoenix, Arizona

End Time: 2024-10-29T22:27:11.000Z

Shipping Cost: N/A USD