Description: YUCHENGTECH Hot Melt Edgebander Glue Hot Melt Glue Pellets Adhesive for Edge Banding Machine (11 Lb) 1.【Features】: This medium temperature adhesive has a viscosity range of 9000-12000/cps, high viscosity and good flowability, excellent thermal stability, and can effectively prevent carbonization, meeting various daily bonding needs. 2.【Important parameters】: Weight:11 Lb ; softening point: 80±5℃; operating temperature: 150-180℃; viscosity value: 9000- 12000/cps; curing time: 8- 15 seconds. 3.【Recommended operating conditions】: glue pot temperature: 170℃-190℃; Roller temperature: 180℃-210℃; Substrate temperature: ≥ 15℃; Feeding speed: ≥20m/min; Base material moisture content: 8-10%; Pressure value: 3-5 kg/cm². 4.【Note】: Since the use temperature of the product is 150-180 °C, the operating temperature should not exceed 180°C for a long time, so as not to cause gum cracking and reduce the viscosity of the glue. 5.【Application】: This adhesive glue is suitable for manual or semi-automatic edge banding machines, as well as small edge banding machines. Suitable for PVC, ABS, acrylic, polyester, wood veneer, decorative paper and other edge banding materials. Matters needing attention: 1. Due to the use temperature of this product being 150-180 ° C, the operating temperature should not exceed 180 ° C for a long time to avoid causing gum cracking and reducing the viscosity of the adhesive. 2. The amount of glue in the glue pot should be added according to actual use. Adding too much glue can cause the glue particles to melt multiple times, which can cause them to deteriorate, age, reduce viscosity, and affect adhesion. 3. Please store in a cool, dry and ventilated place, avoiding direct sunlight, as the opening and curing time may vary depending on the adhesive temperature and ambient temperature, coating amount, bonding time, and bonding pressure. 4. Due to the high temperature of the glue during heating, please do not touch it directly with your hands. If necessary, please wear gloves and protective clothing to prevent burns. Operation tips: 1. Always use a thermometer to measure the actual temperature of Hot-melt adhesive on the roller. 2. In order to avoid thermal degradation of the product, the temperature of the adhesive groove should be appropriately reduced during work intervals. 3. If the temperature of the wheel is too low, it will cause low adhesion. Recommended operating conditions: Roller temperature: 180 ° c-210 ° c Feed speed: ≥ 20m/min Rubber temperature: 170 ° c-190 ° c Base material moisture content: 8-10% Pressure value: 3-5 kg/cm² Substrate temperature: ≥ 15 ° C Storage method: Store in a dry and cool place below 40 ° C for a period of 2 years. Product parameters： Weight：11 Lb Softening point: 80士5°C Service temperature: 150-180℃ Viscosity value: 9000- 12000/cps Warranty The warranty shall not apply to the following circumstances: a) Damage caused by undue wear tear, misuse, improper installation or operation, neglect, accidents. b) Damage caused by natural disasters, flood fire, lightning, or pollution. c) If the item was opened, any parts removed or repaired by any unauthorized person. d) If damaged parts are the TFT screen or the screen has less than 3 dead pixels. SHIPPING Domestic Buyers - We ship within 3 business days of payment, usually sooner - We offer FREE shipping on all orders! - We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed - We have confidence in our products, but if you are not fully satisfied please contact us within 30 days of purchase and you will get full refund. International buyers – please note: Import duties, taxes, and charges aren't included in the item price or postage cost. These charges are the buyer's responsibility. - Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. * Order Cancellation Policy ** You can return a product for up to 30 days from the date you purchased it. 1. The seller reserves the right to cancel the special case only due to eBay cancellation fee. 2. The decision of seller is the final. 3. The seller will respond to the cancellation request within 2 business days. Please wait for the result of cancellation. 4. In case the cancellation is not completed by some reasons, the buyer can follow the options below to get the refund. 4.1 The buyer can reject the item when it arrives. 4.2 The buyer can send the item back to the seller within 30 days If the buyer receives item (USA Shipment ONLY). The seller will provide the FREE return label to the buyer when the buyer opens " Return Item" case on eBay by using the reason as "Change my mind" ONLY. 5. When buyer has placed the order. The order will be processed and completed by automatic warehouse system within 5 minutes. In case that buyer sends the cancellation request after 5 minutes of placing the order, the request will be rejected.**Sending direct message to cancel the order is not allowed for every case.* Return Policy For the return case - If buyer would like to return the items for refund or replacement, please CONTACT SELLER to receive the free return label from seller. The refund or replacement will be processed with the tracking number of return label which is provided by seller only. The other ways of return which are not approved by seller will not be processed for the refund or replacement.
Price: 109.18 USD
Location: New York, New York
End Time: 2024-10-28T12:18:19.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Color: 11 Lb
Size: Upgrade 110V
Type1: Type1
Type2: Type2
EAN: 9443389960335
ISBN: 9443389960335
Package Dimensions LxWxH: 12.72x8.98x6.57 Inches
Weight: 11.77 Pounds
Type: Does not apply
MPN: Does not apply
Model: Does not apply
Brand: YUCHENGTECH
