High Presicion Roller Type Wet Film Thickness Gauge Coating Wet Film Wheel Gauge

Description: High Presicion Roller Type Wet Film Thickness Gauge Coating Wet Film Wheel Gauge 0-25um/50um/100um/200um/500um Description: The instrument is in accordance with international standards ISO2808-1974 (E)"Paint and varnish-Film thickness determination". Mainly used for measuring the thickness of the wet film of the coating surface and roughly estimate the thickness of dry film. The instrument that can be used in laboratory and used for production control. Use and operation method: 1. The paint is coated on the suitable hardness flat plate (rigid base material), the area of the test plate must be large enough, so that the distance between the film thickness measurement point and the test plate is at least 25mm, the thickness of the wet film was determined immediately after coating. 2. And the test plate fixed on an appropriate level of foundation, so in the determination of the film in the process of test plate will not produce a moving or bouncing, the instrument on the wet film thickness to be measured, so that the minimum reading at the top, and instruments of the eccentric wheel and the wet film between maximum gap just to the right of the wet film party, then the rolling forward and a half weeks (180(degree) and reverse the direction of repeated rolling half a week 180 Mobile DEG), check the instrument the central flange and wet membrane on the surface of the first contact position read reading and the average value was calculated as a reading. 3. And if topcoats contain quick volatile solvent or the solid content is low, then the best in just painted a good film, and at least take a separate reading and calculation these separate readings of the average value. The results of evaluation: When using a linear center section of each scale, that is, the scale of the 80% About the section, the highest accuracy.Specification:Thickness<25um, use range 0-25um wet film gauge.Thickness>25um, use range 0-50um or above range wet film gauge. Model Measurement Range Division value Dimension Material YQH-25 0-25um 1um φ50*27 Stainless steel YQH-50 0-50um 2um YQH-100 0-100um 5um YQH-200 0-200um 10um YQH-500 0-500um 20um What in Package: 1x YQH Wet Film Thickness Gauge1x Packing Case NOTE:1.Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.2. Any Customs tax applied to this package should be covered by buyers.3.As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges.These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.

Price: 140.99 USD

Location: CHINA

End Time: 2025-01-16T11:46:39.000Z

Shipping Cost: 0 USD