HG TYPE THREADED FREEHUB 8-9-10 SPEED FOR SHIMANO

Description: HG TYPE THREADED FREEHUB 8, 9, 10 SPEED FOR SHIMANO Kit contains: One Freehub Body, and one 6000-2rs steel bearing. Weight 172 gram weight, hardened steel body, steel bearings. The cassette can't dig into the body shell since like aluminum bodies. The 10 speed is the maximum cassette recommended, however a 8 or 9 speed may fit and require a spacer. It's best to match the 35 mm length as closely as possible. This size is often used for MTB hubs. Please note, the wheel to freehub hub interface is threaded and a 12mm Allen key is used. To check this please remove the axle by driving it out the non-drive side. This freehub has an outer cartridge bearing. If you find a cup and cone system please see my other listings. Disassembly tip: 1. remove the drive side cone nuts (with cone wrenches) from the axle, 2. Use a soft mallet to drive the axle out of the non-drive side (if it has a cartridge bearing) other wise it will be loose, 3. Use a 12mm Allen bit that can reach the freehub lock nut and un-thread it. 4. The freehub can now be removed and replaced in the reverse order. Free shipping in the USA! We ship daily! Check out our other items, including our HubDoctor® Mavic® Freehubs Rebuild Kits. The cost-saving solution for rebuilding Mavic® cassette hubs. Normal 0 false false false EN-US X-NONE X-NONE

Price: 34.95 USD

Location: Orange, California

End Time: 2024-08-24T16:43:50.000Z

Shipping Cost: 10.4 USD