Heavy Duty Worm Gear Hose Clamp Assortment Kit 14 PCS(5/16 to 2-3/4 inch),All 5/

Description: Non-Stripping: The band of our hose clamp kit is thick and non-perforated. Most typical hose clamps are thin and perforated which's easy to deform and strip the perforations if the screw clamp is over-torqued. The buckle bottom is welded into one-piece housing for higher tensile strength. These hose clamps are heavy duty to provide superior clamping force for solid & safe seal!Hose Protection: As our 4th picture, the rolled-up band is to prevent metal edge cutting into the soft hoses(silicone, pvc or rubber). This is a safe design to eliminate hose damage when final torquing, especially for fuel line gas line, heater and automotive projects.Non-Perforated Solid Band: Our non-perforated band is virtually impervious to over-tightening, deformed and stripping. The thicker metal is less vulnerable to stress cracking, so the life of metal clamps can last longer. The embossed band also protects the soft hoses from shearing or extruding ("cheese-grater" makes you hard to remove the tubing clamps out of hoses).Non-Metric Sizes: The slotted screw HEX head is 5/16". Compared with other metric size adjustable hose clamps, our hose clips clamps were engraved clear inch sizes on band for easy and fast identification when using. This hose clamp set include 7 sizes: 2 PCS each of 5/16 to 1/2", 3/8 to 5/8", 1/2 to 3/4", 5/8 to 1-1/16", 1 to 1-5/8", 1-1/4 to 2" and 2 to 2-3/4".Hose Clamps Stainless Steel: The housing, screw and band of our metal hose clamps are all made of high quality 304 SS. The neutral salt spray(NSS) test is 100 hours. These worm drive hose clamps are compatible with SAE J 1508 standards.Note: The screw is made of 304 stainless steel as well. The screw surface is coated with zinc to prevent metal grinding and micro welding when clamp is torqued at high speed, especially for electric screwdriver. We guarantee all built with 304 SS.Note: The screw is made of 304 stainless steel as well. The screw surface is coated with zinc to prevent metal grinding and micro welding when clamp is torqued at high speed, especially for electric screwdriver. We guarantee all built with 304 SS. STEELSOFT 14 PCS worm clamp assortment kit are made of all 304 stainless steel to provide dependable and long lasting use. These non-perforated band hose clamps are based on the popular general purpose worm gear hose clamps, but engineered to prevent hose damage during using. The embossed band with rolled-up edge design is perfect for silicone, PVC or rubber soft hoses, protecting them from extruding or shearing. The free torque of our worm drive hose clamps are designed in a neutral level so that the tension can be maintained after initial installation. The welded one-piece housing is much stronger than other embedded buckle structure which is easily stripping out. 7 sizes stainless hose clamps assortment include: 2 pcs 5/16 to 1/2 inch, 3/8"(9mm) band width, mini size#4 2 pcs 3/8 to 5/8 inch, 3/8"(9mm) band width, micro size#4 2 pcs 1/2 to 3/4 inch, 3/8"(9mm) band width, size#6 2 pcs 5/8 to 1-1/16 inch, 1/2"(12mm) band width, size#10 2 pcs 1 to 1-5/8 inch, 1/2"(12mm) band width, size#16 2 pcs 1-1/4 to 2 inch, 1/2"(12mm) band width, size#24 2 pcs 2 to 2-3/4 inch, 1/2"(12mm) band width, size#36 Total Quantity: 14 PCS Band Thickness: 0.024" Material: All 304 stainless steel(including screw) Neutral Salt Spray Test: 100 hours Screw Hex Size: All 5/16" Failure Torque: 60 lb-in Recommended Installation Torque: 30-35 lb-in Service Temperature: -22℉ to +338℉

Price: 12.64 USD

Location: Clinton, New Jersey

End Time: 2025-01-12T14:52:34.000Z

Shipping Cost: 0 USD