H59 Brass Wire Solid Bare Φ 0.3 0.5 0.8 1 1.5 2 2.5 3 4 5mm Good Conductive

Description: H59 Brass Wire Solid Bare Φ 0.3 0.5 0.8 1 1.5 2 2.5 3 4 5mm Good Conductive Product Description: 【Type】: Brass Wire 【Material】: Brass 【Features】: Good mechanical properties and good plasticity. 【Diameter】: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1mm, 2mm, 3mm, 4mm, 5mm 【Size】: Customizable and Machinable (for details, please consult customer service) 【Brass】: It is an alloy composed of copper and zinc. When the zinc content is less than 39%, zinc can dissolve in copper to form a single-phase brass, called single-phase brass. It has good plasticity and is suitable for cold and hot pressure processing. When the zinc content is greater than 39%, there is a single-phase copper zinc based solid solution called duplex brass, which reduces plasticity and increases tensile strength. It is only suitable for hot pressure processing. If the mass fraction of zinc continues to increase, the tensile strength decreases and has no practical value. 【Characteristic】: Brass is an alloy of copper and zinc. Changing the zinc content in brass can yield brass with different mechanical properties. The higher the zinc content in brass, the higher its strength and slightly lower plasticity. The zinc content of brass used in industry does not exceed 45%, and a higher zinc content will cause brittleness, leading to deterioration of alloy properties. Adding aluminum to brass can improve its yield strength and corrosion resistance, while slightly reducing its plasticity. Brass with aluminum content less than 4% has good comprehensive properties such as processing and casting. Adding 1% tin to brass can significantly improve its resistance to seawater and marine atmospheric corrosion, hence it is called "naval brass". The main purpose of adding lead to brass is to improve cutting performance and wear resistance, and lead has little effect on the strength of brass. Manganese brass has good mechanical properties, thermal stability, and corrosion resistance; Adding aluminum to manganese brass can also improve its performance and obtain castings with a smooth surface. Brass can be divided into two types of products: casting and pressure processing 【Note】: There are tolerances for product dimensions. Package Included: According to your choice! On Apr 6, 2024 at 00:12:54 PDT, seller added the following information:

Price: 3.19 USD

Location: Shenzhen, GD

End Time: 2024-12-06T08:02:21.000Z

Shipping Cost: 3.99 USD