GMX Water Magnets model 800 Fluid Conditioner Used

Description: Installing The Magnetics Place the Model 800 against the pipe or tube to be treated. The units should NOT be attracted to the pipes. Use any magnet to test the pipes. If the magnets are attracted to the pipe, a 24" section of pipe will have to be replaced with a piece copper, PVC, or any other NONFERROUS material. Place the backing plate on the opposite side of the pipe and align the holes with the unit. The backing plate is designed to be reversible. Place the dimples toward the pipe for 1/2" and 5/8" pipe or tubing and place the dimples away from the pipe for 3/4" and 1" pipe. Insert the nylon bolts through the holes in the unit and backing plate and secure with the wing-nuts. Tighten the unit until it is snug against the pipe. Do not over tighten ! The second unit should be mounted tandem to the first unit and spaced 1" apart. When installing multiple units they should ALWAYS REPEL (Labels will be facing same direction) and NEVER ATTRACT each other. If the units attract, they will cancel each other out and the system will not work. The flow of water through the third unit at the water heater's hot line should be in the same direction as the first two units with respect to the label. The water should enter the "G" side and exit out the "X" side. The actual direction of the water flow through the units does not matter; as long as, the water flow is in the same direction through all the units installed within one system. Most GMX units now come with flow direction arrows applied to help in eliminating this potential problem. Specifications Magnets: Strontium Ferrite Permanent Ceramic. Coating: Poly Vinyl Size: 5-1/4" x 4-3/4" x 1-3/4" (L x W x H) Mounting Bracket: Medium gauge steel developed through computer research. Weight: 2 pounds each.

Price: 110 USD

Location: Aberdeen, South Dakota

End Time: 2023-10-06T13:49:55.000Z

Shipping Cost: 10.33 USD