GM 10 Bolt 8.5 Or 8.6 Ring And Pinion 3.08 Ratio Gear Set Car Or Truck OEM AAM

Description: Good Used GM 10 Bolt 8.5"/ 8.6" Ring & Pinion3.07 / 3.08 RatioOUT OF A GM 10 Bolt axle that has been disassembled and is being sold for parts13 Teeth on pinion40 Teeth on ring gear # 1235126Standard 30 Pinion Spline Pinion Shaft Good Used OEM GMC Take Out Ring And Pinion. Gear Set Pictured Represents All Available In This Listing. This ring & pinion fits GM 10 Bolt 8.5" front and rear axles from early 1970's to present. 8.5 Truck1977-Present C-10, C1500 Pick-up (five lug, some trucks used 12 bolt axle in these years, 1977-1981 depends on GVW)1977-1998 G-1500 Van (five lug)1981-1998 K-10, K1500 Pick-ups1981-Present C-10, C1500 Suburban (five lug)1981-Present K5 Blazer & Jimmy1992-Present Tahoe/Envoy1992 & 1994 GMC Typhoon1991-1992 GMC Syclone1994-1998 Blazer S-10 ZR-2 (28 Spline)8.6 Truck1999 & Up C1500, K1500 Pick-ups1999 & Up C1500, K1500 Suburban1999 & Up G1500 Vans (five and six lug)1999 & Up Tahoe/Envoy1999 - 2004 Blazer, S-10, ZR-2 (28 Spline) This Ring and Pinion will fit GM or Chevy K5 Blazer K10 and K20 Suburban K10 and K20 1/2 to and 3/4 ton Trucks with GM10 Bolt 8.5" Front axles starting in 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 to 1988 In the K10 and K20 1/2 ton and 3/4 ton Trucks And 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 to 1991 in the the K5 Blazer and K10 and K20 Suburban with GM 10 Bolt front axlesIt will also fit in a Gm 10 bolt 8.5 rear axle in a Blazer Suburban and K10 K1500 1/2 ton Pickup Truck from 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 to 1998 The following is a list of some of the other applications this ring and pinion will fit where a GM 10 bolt 8.5 is used: Chevrolet 1971 & Up Impala, Caprice & Misc. Full-sized 1970 - 1981 Camaro (Some 12 bolt axles were also used in the Camaro during these years) 1970 - 1977 Monte Carlo 1970 - 1979 Nova 1/2 Ton Chevy GMC pick-ups that use a 10 Bolt axle Buick 1972 & Up Roadmaster Wagon & Misc. Full-Sized 1973 - 1977 Apollo 1973 - 1977 Century 1984 - 1987 Grand National 1973 - 1977 Regal 1973 - 1978 Electra 1973 - 1984 Gran Sport 1973 - 1984 Le Sabre 1971 - 1974 Roadmaster Oldsmobile 1971 - 1989 Misc. Fullsize Rear Drive 1985 - 1988 Hurst Olds 1973 - 1979 Omega Pontiac 1971 & Up Misc. Fullsized Rear-Drive 1970 - 1981 Firebird TA 1971 - 1977 Grand Prix 1971 - 1977 LeMans 1971 - 1977 Ventura Specifications Ring Gear Diameter 8.5" 8.6" Ring Gear Bolts 10 7/16" X 20 LH Diff Cover Bolts 10 Pinion Splines 1.625" 30 Spline Case Changes High 2.56 Only Low 2.73 3.08 3.42 3.73 4.10 4.56 4.88 5.13 5.38 5.57 Pinion Bearing Preload New 14-19 in lb Used 6-8 in lb Back Lash .006" - .010" Ring Gear Bolt Torque Specs. 65 ft lb Bearing Cap Bolt Torque Specs 60 ft lb Uses the following Master Install Kit: GM 8.5" Rear 81-98 35-2021 GM 8.5" Front 77-91 35-2021F GM 8.5" w/Big Brg Locker 35-2021L GM 8.6" 99-09 35-2022 GM 8.6" 09 & Up 35-2022A Uses the following Install Kit: GM 8.5" Rear 81-98 25-2021 GM 8.5" Front 77-91 25-2021F GM 8.6" Rear 99-08 25-2022 Bearings are used and not guaranteed Questions? Feel free to ask us! We usually respond within 24 hours. SHIPPING INFORMATIONWe ship:UPSUSPSVarious Carriers for truck freight shipments We offer same-day shipping on most items we sell if order is paid for by 3:00 p.m. mountain standard time Monday through Friday. Same-day shipping does not apply on holidays or when vacation settings are active.

Price: 127.12 USD

Location: Ogden, Utah

End Time: 2024-12-17T19:06:07.000Z

Shipping Cost: 0 USD