GCSOAR MPPT Charge Controller 30A 12V 24V Auto Max PV 100V Built-in BLE APP

Description: GCSOAR MPPT Solar Charge Controller 30Amp (Built-in Bluetooth Module Programmable by APP) : Max Input Current: 30A, 12V/24V auto identifying system voltage. Max Input Solar Power: 400W when battery system is 12V or 800W when battery system is 24V; Max input Voltage 100V; Auto control system to limit the charging power & current go over the rated value.Outstanding Performance:This mppt charge controller 30Amp with tracking efficiency >99.9%. Full digital technology, high charge conversion effciency up to 98%. 4-stage charging (MPPT, Boost, Float, and Equalization) maximizing get more energy from solar panels into your battery. Real-time energy recording and statistical with Multiple load control modes.Built-in Bluetooth module, which can pair with Android and iOS APP (Solar life) to monitor and set parameters about solar panels/ battery/ load. Monthly charging data can be caculated and displayed by grouping and graphs.Battery Types & Load Mode: Compatible with Lithium ,Sealed, Gel, AGM,Liquid Batteries. Multiple load control modes: Always on, Dusk to Dawn, Evening and Manual. You can set these parameters by controller setting or APP (Solar life). Please watch video steps to connect APP with controller's bluetooth .Ten Electronic Protection:PV over current protection/ PV short circuit protection/ PV reverse polarity protection/ Battery reverse polarity protection/ Battery over voltage protection/ Battery over discharge protection/ Load over current protection/ Load short circuit protection/ Over temperature protection/ Damaged remote temperature sensor protaction. GCSOAR MPPT Solar Charge Controller 30 Amp ,12V/24V DC auto work ,Max PV 100V , Common negative grounding. Built-in Bluetooth Module Programmable support Android & iOS APP . This intelligent and multi-functional controller is designed for off-grid applications and 12V/24V automatical recognization battery voltage. Integrating smart 4_stage MPPT charging and temperature compensation function, it increases battery life and improves system performance. The controller comes equipped with fully electronic protection functions to prevent damage from installation mistakes or system faults.Add EMC function to give you Safer protection and quieter environment .Technical Data:Model: GCMT3010E-BT (Built-in Bluetooth Module )Rated charge and discharge current :30 Ampsystem voltage:12V/24V DC auto workMax. PV input power: 400W when battery system is 12V / 800W for when battery system is 24V .Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)Battery type :Lead-acid: GEL , AGM ,Liquid ; Lithium and User-defined .Battery voltage range : 8～32VMPP voltage range:V(BAT+2V)～72VGrounding : Common negativeCommunication :Bluetooth APPLoad Work Mode : Always on, Dusk to Dawn, Evening, ManualTracking efficiency : ≥99.6% , Max. conversion efficiency :98%Working environment temperature : -25℃～+50℃(100% input and output)Temperature: -20°C -- +70°C/-4°F -- 158°FController Terminals:#6 AWG(16mm2) ; Recommended Wire cable: #8 AWG(10mm2)Dimension:189*255*69mm ; weight :1.52 KGPackage List:1 X 30A MPPT Solar Charge Controller (Built-in Bluetooth Module)1 X Temperature sensor6 X Wire terminnal Connectors1 X Manual (English)Note :We have serives center in Chicago, Illinois . Our professional engineer local team supply solar system solutions and after-sales services for you in time . MPPT Solar Charge Controller Built-in Bluetooth module , Compatible with Android & iOS APPDownload APP keyword : Solar LifeKeep phone's bluetooth on (don't need to pair by phone's setting ), just open APP to find bluetooth and pair with your controller ;You could watch Amazon listing video：GCSOAR MPPT charge controller setting by IOS APP . (Android APP video update later )How to program for Lithium Battery or USER type？Via Controller Setting Buttons ;Via Phone APP [ Android or IOS] (bulid-in Bluetooth Module setting parameters ) ;Please watch Amazon listing video , you could know this controller better .Step: Connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order 3. 2. 1.Battery must be connected with controller first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)

Price: 91.99 USD

Location: Chicago, Illinois

End Time: 2024-11-16T09:11:33.000Z

Shipping Cost: 0 USD