GB 42 inch LOW PRO 3/8P x .050 gauge MILLING BAR #SNHL42-50WR

Description: Hi friends of OBM, here is an amazing product i have been meaning to list. SNHL42-50WR is a bar that fits all medium mount STIHL bars and with an adaptor it can fit all the medium to large Husqvarna saws as well. Depending on the length of the bar (20 to 42 inch) they are best suited for saws in the 60cc and up capacities. This 42 inch bar would be suited for 75cc and up . These "thin kerf technology" bars are incredible, as the kerf (width of cut) is only around 5.5mm. The thing is they turn your chainsaw into a bandsaw!, making this the go to bar for those of you wanting to cut slabs, this is especially true when you are equipped with saws up to the size of the 660, 661 etc. or 394, 395 for that matter. The thing to consider too is that you do not waste wood, Like if you consider comparing milling with the std .404 milling chain to this thin kerf set up, well for every four cuts with the .404 you have wasted (to sawdust) a 25mm board... there in lies the value too. Less width of cut equals less fuel, less power required to drive the chain and less time spend cutting too. This 42 inch GB Thin Kerf Milling Bar is matched with 137 Drive Links (DL of 3/8P chain if using a 7T rim, Please note too that you will need a special 3/8 Pico rim sprocket too, as even though the pitch is the same as the standard 3/8 chain the 3/8P has smaller drive links thus the rim sprockets are of a different design. We can help you with the supply of those too. If you need an bar adapter to run these bars on your Husqvarna saw you will have to search for a GBSP9-12 adapter on our site. The thin kerf not only allows you to cut wood as if you have a laser sabre (like Star Wars stuff) but also its safer too as the kickback risk is greatly reduced too. Of course all chainsaws are hell dangerous so do not get complacent just because there is less kickback. I have chains for these as well in the Rapid Micro Pro (Semi Chisel) style. OBM recommends using the 2N1 Filing Guide for the smaller 3/8 Pico Chains as it really does make the sharpening of the Pico chain easier, for sure it does. but at the end of the day its your call. Price is for the bar only but trust me you will be impressed! Postage is worldwide... Thanks for looking :) OBM your seven day saw shop with a passion outbushman.com.au for best pricing suits the following STIHL models : 044, MS400, MS440, MS441, MS442, 046, MS460, MS461, 056, 056S, 056MAGII, MS500i, 064, 066, MS651, MS660, MS661 and the following Husqvarna andother Brands / Models: just make sure they are 70cc or larger DOLMAR: PS6400, PS7300, PS7900 HUSQVARNA: 1100, 160, 162, 163, 180, 181, 185, 2100XP, 2101, 260, 261, 263, 266, 268, 272, 280, 281, 285, 288XP, 298, 3120XP, 362XP, 365, 371XP, 372XP, 380, 385XP, 390XP, 394, 395XP, 480, 570, 575XP, 61, 62, 65, 66, 70, 77 JONSERED: 2063, 2065, 2071, 2077, 2083, 2094, 2095, 2156, 2159, 2163, 2165, 2171, 2186, 625, 630, 635, 670 WEST COAST MAKITA: DCS6400, DCS6401, DCS7300, DCS7301, DCS7900, DCS7901 POULAN & POULAN PRO: 375, 395, 415, 425, 475, PP445, PP505, PP655 SHINDAIWA: 1091, 550, 575, 577, 680, 695, 757, 801, 901 SOLO: 603, 662, 665, 667, 670, 675, 680, 681, 690, 694 tags: GB SNHL42-50WR Milling Bar,

Price: 295 AUD

Location: Bunbury

End Time: 2024-12-11T02:36:30.000Z

Shipping Cost: 65.15 AUD