FIX IT STICKS Maintenance Compact All-in-One Torque Driver Kit, FISMUTK

Description: FIX IT STICKS Maintenance Compact All-in-One Torque Driver Kit, FISMUTK NOTE: NO DELIVERY TO FREIGHT FORWARDING COMPANY ADDRESSES AND WAREHOUSE FEATURESAll-in-One Torque Driver (15 - 65in lbs)T-Way T-Handle Wrench15 different bits1/2" Socket and 1/4" bit adapter setZippered case with Molded Holder DESCRIPTION Fix It Sticks All-in-One Torque Driver Kit Featuring the Fix It Sticks All-in-One Torque Driver. Tighten down your scope rings, mounts, actions screws, etc. while in the field, at the range, or at home. No more over or under tightening your critical components. Lightweight and compact - the All-in-One Torque Driver Kit will always be there when you need it. Kit includes: All-in-One Torque Driver (15 - 65 inch lbs);T-Way T-Handle Wrench;15 different bits: T10, T15, T20, T25, [hex 3/32, 5/64, 1/8, 5/32, 3/16, 2.5mm, 3mm, 4mm, 5mm], P1, slotted #5;1/2" Socket and 1/4" bit adapter set;Zippered case with Molded Holder.Please note that the All-in-One Driver operates differently than our Torque Limiters. All-in-one Torque Driver Instructions Before use, confirm tool is at the "0" setting. The tool is factory calibrated and requires no adjustment before use. Do not attempt to adjust the collar - it is fixed in position by design. 1. Insert the All-in-one Torque Driver into any 1/4" drive handle. 2. Insert the appropriate bit for the fastener to be used. 3. Turning the drive handle clockwise, carefully tighten the fastener until the target torque mark on the collar aligns with the fixed mark on the end of the tool. Gently release pressure, and the torque driver will return to the "0" setting. Note: Failure to follow these instructions may affect accuracy and/or damage the tool. Always follow manufacturer torque specifications to avoid damage to firearms and accessories SPECIFICATION What's inside1All-in-One Torque Driver (15 - 65 inch lbs)2T-Way T-Handle Wrench315 different bits41/2" Socket and 1/4" bit adapter set5Zippered case with Molded Holder

Price: 96.65 USD

Location: Thanh Hoa

End Time: 2024-03-05T09:15:53.000Z

Shipping Cost: 0 USD