Forespar Marlon thru hull and valve backing plate Series 93

Description: Please see our other listing for Marlon 849 Series at: https://www.ebay.com/itm/305021414264 We will refund any extra shipping fees the day of shipping if ordering different sizes separately but shipped together. We are manufacturing in house with a cnc router machine 1/2 inch thick fiberglass seacock backing plates. This listing is for Marlon - Forespar & Trudesign thruhull / valve backing plates. We also make for both Groco and Buck Algonquin Flange Valve line and thru hulls, see our store and other listings. These are produced from Extren 525 which is water proof, fire proof, mass produced polyester fiberglass sheet with a 30 thousand PSI compression and tensile strength. Epoxy, polyester and vinylester resins and (5200 - not recommended) will bond to it. The seacocks and through hulls can be purchased from West Marine and Defender.com and many others. To install adjust valve to desired position smear some thickened epoxy between hull and plate and tighten the thru hull. This prevents any epoxy getting into the fitting. Thickened epoxy will also fill any slight hull curvature. Install as a dry fit first. If the backing plate needs to be sanded to fit the curvature of the hull, orientate the valve correctly first and mark off the correct section to sand with very course sand paper or file. A belt sander works well. Trudesign 1.5": 1.9" ID, 4.6" OD Product Name Fits Marlon Seacock Series 93, no flange so no bolts OD ID MA93 – 1 1/2", 3/4" 4.125" 1.1" MA93 – 2 1.0", 1.25" 4.75" 1.6" MA93 – 3 1.5” , 2.0” 5.25” 2.125”

Price: 27.5 USD

Location: Deltaville, Virginia

End Time: 2024-08-02T14:15:00.000Z

Shipping Cost: 10.6 USD