for Vive Pro DAS Adapter

Description: This is an adapter that allows the Vive Deluxe Audio Strap (DAS) to attach to the Vive PRO. (As always use at your own risk. Not responsible for any damage to Vive Pro or DAS.) You are only buying the plastic PEG. It will come as a pair in color Black. Printed in PLA+ You need to remove the screw and plastic gasket that attaches the Vive Pro Strap to the Vive Pro (first detach the audio cables from the Vive Pro Strap... cable connector pops out don't pull it). I fed the cables back through the hole into the headset and taped with black tape before putting the adapter in. I found a better way to deal with the audio cables. I fed the plastic connector into the hole where the wire comes out and the rest of the wire I wrapped inside the circle where the adapter comes out. This works out better since there is no wire that you have to tape somewhere in the headset. Make sure to test the adapter first by popping into DAS hole before trying to attach to Vive Pro. Be sure to file or sand any burrs or ridges where the adapter inserts into DAS. Then just twist sideways to pop adapter out of DAS... and insert adapter into side hole in Vive Pro headset. Will take quite a bit of pressure again to get adapter into DAS... but generally less that the initial test. This is not our design, we do not have the Vive Pro, but we printed this as a service to our customer and confirmed the fit is great so we now offer this product to others that may find this useful. This designed was done by tselling at https://www.thingiverse.com/thing:3890440 under the Creative Commons - Attribution license. The Above descriptions are that of tselling. Go to the thingiverse link to read the original or download the file and print it yourself.

Price: 11 USD

Location: Stockton, California

End Time: 2023-10-18T18:56:43.000Z

Shipping Cost: N/A USD