For Mercedes W220 Vacuum Assist Supply Pump Air Motor Pneumatic PSE System

Description: S55 AMG(2000~2006) Closing Assist Vacuum Pump Motor for Mercedes C215 CL500, CL600, CL65AMG, CL55 AMG (2000~2006) Manufacturer Part Number (W220): A 220 800 02 48, A 220 800 03 48, A 220 800 06 48, A 220 800 07 48, A 220 800 08 48, A 220 800 11 48, A 220 800 12 48 Fitment: 2003-2006 Mercedes-Benz SL500 2003-2007 Mercedes-Benz SL55 AMG 2007 Mercedes-Benz SL550 2004-2007 Mercedes-Benz SL600 2005-2007 Mercedes-Benz SL65 AMG 2000-2005 Mercedes-Benz CL500 2001-2005 Mercedes-Benz CL55 AMG 2001-2003 Mercedes-Benz CL600 2000-2005 Mercedes-Benz S430 2000-2005 Mercedes-Benz S500 2001-2002 Mercedes-Benz S55 AMG 2001-2003 Mercedes-Benz S600 What you get: 1 X motor(not include other accessories) 3 Year warranty About the shipment We will send the item in 1 day after your payment and ship from China.We will tell you how to track the item when we sent the item. The speedpack shipping need 8-12 days arrive in European and USA .Other country need 15-25 days. Recommendations for repairing the PSE Mercedes W220 block: In order to remove the key ring from the motor shaft, it is necessary to heat the ring with a construction hair dryer to approximately 70-80 ° C. Then, carefully using two slotted screwdrivers, begin to separate the graphite case (around the circumference between the holes) from the metal base of the electric motor, thereby removing the graphite case from the shaft together with the key ring. Attention! Before pressing the ring onto the shaft, you need to measure the inner diameter of the ring and fit the motor shaft under the ring by grinding the shaft with a fine sandpaper. So that the loosened ring is pressed again and held firmly on the shaft, the shaft should be 0.03 mm larger than the ring . The key ring is pressed onto the motor shaft using a large vise and a 6mm hex head. It is necessary to rest the motor shaft on the vise lip on one side, and the hex head on the vise lip on the other sid and press the ring on slowly while heating it with a construction hairdryer. If you have a loose ring that fits on the shaft loosely, it can be seated on the red anaerobic retainer. After assembling the graphite pump, be sure to check the rotation of the engine through the holes in the motor housing. The shaft should spin freely without biting or braking. ATTENTION! After replacing the motor, check the tightness of the vacuum system (door tubes, diaphragm valves in the locks, etc.). Check impeller for wedging. Moisture is not allowed in the graphite pump. Do not allow continuous operation of the pump, more than 7 seconds - BURN OUT! The motor is suitable for PSE compressors: A2208000048 A2208000148 A2208000248 A2208000348 A2208000448 A2208000548 A2208000648 A2208000748 A2208000848 A2208000948 A2208001048 A2208001148 A2208001248 A2208200248 Bosch 0132006359 Bosch 0132006370 Bosch 0132006373 Bosch 0132006384 Bosch 1397220291 98150 JOHNSON 153761

Price: 54.5 USD

Location: Shenzhen

End Time: 2024-12-21T12:04:23.000Z

Shipping Cost: 0 USD