FOR 2001-2010 CHEVY Silverado GMC Sierra 2500 3500HD 2-4" LIFT UPPER CONTROL ARM

Description: Product Description 2-4" Lift Front Upper Control Arms with Ball Joint For 2000-2010 Chevy GMC 2500HD 3500HD Upper control arms(UCA) are a better replacement for OEM upper arms.If your truck have 2 inch or more lift（installed the front leveling kits),the factory upper control arm would limit the suspension which will affect driving performance,our upper control arms will slove these problems.Upgrade your turck front upper control arms,they will give your truck for 2-4" lift and give your truck an aggressive look. compatible with 2000-2010 Sierra 2500HD 2000-2010 Sierra 3500HD 2000-2010 Silverado 2500HD 2000-2010 Silverado 3500HD Owing to extreme flexing, or breakage from a forceful impact，frame may be damaged. Thanks to the steel control arms. FLYCLE front upper control arms can offer better stable and reinforced structure. Replacement the factory control arms,it will lift 2-4 inches for yourtruck and give your truck an aggressive look. TIG Welding can reduce air bubble, prevent components from breaking. Full-Length Welding provide better stable and reinforced structure. Installation Steps: Jack up the car, get tire off. Take inner wheel off.Bend back a little to get enough room. Loosen the long bolt coming through 2 sides. Remove ABS line. Pull out cotter pin, loosen castle nut. Ball joint out by hammer. Remove sway bar end line from the spindle. Remove long bolt, wiggle old arm out. Install back new front upper control arm.

Price: 69.99 USD

Location: Ontario, California

End Time: 2024-10-07T02:15:29.000Z

Shipping Cost: 0 USD