FMUSER 100w 150w fm transmitter for radio broadcast remotely monitor equipment

Description: FMUSER 100w 150w fm transmitter for radio broadcasting 100 watt 150 watt fm broadcast transmitter can remotely monitor equipment * Frequency: 87.5-108MHz * Frequency step value: 10KHz * Modulation method: FM, peak deviation ± 75KHz * Frequency stability: <± 100Hz * Frequency stabilization method: PLL frequency synthesizer * RF output power: 0 ~ 150W, step 0.1W, error ± 0.5dB * Harmonic suppression: ≤-72dB * Inband residual wave: ≤-72dB * Asynchronous AM SNR: ≥-80dB (no modulation) ≥-65dB (400Hz, 100% modulation) * Synchronous AM SNR: ≥-70dB (no modulation) ≥-60dB (400Hz, 100% modulation) * RF output impedance: 50Ω * RF Output Connector: N Female (L16) * Audio Input Connectors: XLR Female and RCA Female * AUX input connector: BNC female * Pre-emphasis: 0us, 50us, 75us (user setting) * Mono signal to noise ratio: ≥ 80 dB (20 to 20KHz) * Stereo signal-to-noise ratio: ≥ 80 dB (30 to 15KHz) * Stereo resolution: ≥ -55dB * Audio frequency response: 30 ~ 15000Hz ± 0.4dB * Audio distortion: <0.1% * Audio level gain: -15dB ~ 15dB step 0.5dB * Audio input: -15dB ~ 0dB * Power supply voltage range: 110V ~ 260V (global voltage) * Power consumption: <320VA * Operating temperature range: -10 to 45 ℃ * Working mode: continuous work * Cooling method: forced air cooling * Cooling method: <95% * Altitude: <4500M * Dimensions: 484 x 260 x 44 mm without handles and protrusions, 19 "1U standard rack. * Weight: 5Kg * Default Password: 000008 1. Connect the antenna first, then switch the power. If you do it reversely, the whole equipment could be burned!! 1 * 150W fm transmitter Introduction: FMT5.0-150H FM radio transmitter is highly reliable, lighter in weight and easier to operate than previous version of transmitter. This transmitter adopts a simple-style design concept. It integrates the 150W FM stereo transmitter exciter, power amplifier, output filter and switching power supply in a 1U high 19-inch standard case, reducing the connecting cables between the components. Features: • User-friendly digital LCD panel, using one rotary knob to control.• The integrated LCD screen displays all the parametric including: transmitter frequency, stereo and mono, volume, amplifier tube temperature, audio signal UV meter, forward power, reflected power, modulation mode, pre-emphasis etc,.• 1U 19-inch thickened all-aluminium case, strong and excellent heat dissipation.• Precise PLL frequency generation system, to ensure that the frequency not drift away for more than10 years, with built-in high-quality stereo encoder.• Outstanding power AGC balance control system, adjustable power output from 0 to 150watts, and automatic gain power control to maintain output power within set range without drifting.• Signal input supports XLR and RCA audio inputs, and also SCA and RDS signals using the BNC connector AUX.• The RF amplifier uses LDMOS transistors to withstand even severe load mismatch exceeding the 65 : 1 VSWR at a 5dB compression point. Panel Description: Strong air cooling system embeded on both front and rear side of transmitter for safer and more stable performance

Price: 760 USD

Location: 广州市

End Time: 2025-01-17T15:00:01.000Z

Shipping Cost: 125 USD