Description: SERIOUS BIDDERS ONLY! PLEASE READ THE DESCRIPTION CAREFULLY! You are bidding on the following: *** BRAND NEW*** FLUKE 789 PROCESSMETER LOOP CALIBRATOR WITH NEW LOOP POWER SUPPLY mA SOURCE AND SIMULATE IN THE FACTORY PACKAGING Model #: Fluke 789 Retail: $1271.99 Item Details: Manufacturer: Fluke Description: The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it's even better, the range is extended with the new Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less. Features: 24 V Loop power supply Very large dual display Enhanced backlight with 2 brightness settings 1200 Ohm drive capability on mA source HART mode setting with loop power and a built-in 250 ohm resistor 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check Externally accessible fuses for easy replacement Infrared-port to process data in FlukeView Forms (V2.1) software Fluke 789 features that are also included in the Fluke 787 Precision 1000 V, 440 mA True-RMS digital Multimeter 0.1% dc voltage accuracy 0.05% dc current accuracy Frequency measurement to 20 kHz Min/Max/Average/Hold/Relative modes Diode Test and Continuity Beeper Simultaneous mA and % of scale readout 20 mA DC current source / loop calibrator / simulator Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp Externally accessible battery for easy battery changes Safety Conformance Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards. Specifications: Specifications Current Measurement Range: 0-1 A AC or DC Resolution: 1 mA Accuracy: 0.2% + 2 LSD (DC) Range: 0-30 mA Resolution: 0.001 mA Accuracy: 0.05% + 2 LSD Current Sourcing Range: 0-20 mA or 4-20 mA Resolution: 0.05% of span Drive Capability: 24 V Compliance or 1200 Ω @ 20 mA Frequency to 19.999 kHz, 0.005% + 1 LSD Continuity Beeps for resistance < 100 Ω Voltage measurement Range: 0-1000 V AC (true-rms) or DC Resolution: 0.1 mV to 1.0 V Accuracy: 0.1% Rdg + 1 LSD (VDC) Resistance measurement to 40 MΩ, 0.2% + 1 LSD Diode test 2.0 V shows diode voltage drop Display current and % of span Yes Auto step, auto ramp Yes Environmental Specifications Operating Temperature -20 ºC to 55 ºC Storage Temperature -40 ºC to 60 ºC Humidity (Without Condensation) 95% up to 30 ºC 75% up to 40 ºC 45% up to 50 ºC 35% up to 55 ºC Temperature Coefficient 0.05 x (specified accuracy) per ºC (for temperatures < 18 ºC or > 28 ºC) Safety Specifications Electrical Safety Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92 Overvoltage category IEC 1010-1 CAT III 1000 V IEC 1010-1 CAT IV 600 V Maximum voltage 1000 V rms Mechanical & General Specifications Size 50 x 100 x 203 mm (1.25" H x 3.41"W x 7.35" L) Weight 600 g (13 oz.) Batteries 4 AA Alkaline batteries Warranty 3 years Battery Life 140 hours typical (measurement), 10 hours typical (sourcing 20 mA) Shock & Vibration Random, 2 g, 5-500 Hz 1 meter drop test Accessories: Model Name Description Fluke 789 ProcessMeter AC72 Alligator Clips Four AA 1.5 V alkaline battery (installed) TL71 Safety-Designed Test lead Set Users Manual and Quick Reference Guide Condition: Brand New Auction Details: Shipping: All domestic packages will be shipped out via Fedex, UPS, or USPS within the lower 48 states Shipping to Hawaii and Alaska would be extra, and those shipments will be shipped out via USPS priority mail, unless otherwise stated in the auction or negotiated in emails. Shipping to APO, RR, or PO box will be handled via USPS and would be extra on certain items, please email us prior bidding. Goods will be dispatched the latest in 2 business days. Goods will be shipped out after the holidays and weekends. No local pick ups accepted at this time, unless otherwise stated in the auction Shipping costs are set at that price to cover some of our costs and packaging and handling fees as well as some of the ebay and paypal fees which add to about 13% of the total end price. Please don't email us to negotiate about the shipping costs. We are extremely busy, so we might not answer your emails. Shipping and handling fees are not negotiable, by bidding on this item the buyer agrees to pay for all the shipping costs We ship to any destination in the world. INTERNATIONAL BUYERS: The International shipping rate is flat rate to most destinations in the world, please email us for additional information. California buyers are subject to pay 9% tax. International buyers are responsible for all tax and custom duty charges outside the country. Payment: U.S. Buyers: Credit cards through PayPal Please note that we can't accept direct credit card payments at this time International Buyers: PayPal or Wire Payment is due within 6 days of auction closing. If payment is not received within this time unless otherwise stated or negotiated, item will be relisted on eBay. Terms & Conditions: After the auction is closed, auction winners should contact us regarding any questions or requests. After the auction is closed, payment should be received within 6 days. Buyer has 14 days to return the product, return product should be brand new with all original accessories, buyer pays shipping costs both ways. Shipping and handling charges are not returnable Items will be replaced or exchanged in case of DOA If the same item or similar item is not in stock in case of DOA, the buyer will receive a refund back We combine shipping to save customers money, however, there will be an additional charge per item, please read the description for each item to find out about the specific fees. All buyers are subject to pay all taxes and duty fees inside and outside of the United States, Our facilities are closed during the weekends and other holidays and there will be no shipments during these time periods. All packages will go out after the weekend or after the holidays. Contact Information: Please use ebay message
Price: 1169 USD
Location: Encino, California
End Time: 2024-08-21T21:49:30.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Model: 789
Type: Processmeter
UPC: 95969112192
DC Voltage Range: 0 to 1000 V
MPN: 789
Input Protection Features: HRC Fuse, Thermistor (PTC), Metal-Oxide Varistor (MOV), Clamping Circuit, Diode Bridge, Shunt Resistor
Measurement Category: CAT III
AC Voltage Range: 24V
Resistance Range: 0-40 Mohm
Maximum Input Voltage: 1000V
Brand: Fluke
Form Factor: Handheld
Test/Measurement Functions: Resistance, Frequency (Hz), Inductance, AC Current, DC Voltage, Capacitance, Continuity Test, Duty Cycle, DC Current, AC Voltage, Diode Test
Features: Auto Power Off, Over Range Protection, Relative Measurement, Data Hold, True RMS, Auto-Ranging, Fused Current (A) Terminal, Manual-Ranging, Separate Current (A) Terminal, Touch-/Auto-Hold Function, Backlight, Data Logging, Fuse Door Access, Battery Door Access, Clamp, Fused Current (mA/uA) Terminal, Min-Max Value Mode
Number of Counts: Battery Powered
Current Range: 0 to 30 mA
Protection Against Liquids: Dripping Water
Protection Against Solids: Tools and Thick Wire, Dust Protected
Display: Digital
