Description: Temporary Floor Protectionalbert floorotex is an innovative surface protective product suitable for all types of flooring. It is ideal for remodeling jobs as well as new construction. albert floorotex can be applied by flooring contractors, painters, movers, and many others. albert floorotex is one of the most popular floor protective products in Europe. Product description albert floorotex is made of recycled polyester film. The surface is made of a waterproof and breathable film. The underside is made up of a spray-on adhesive which allows the product to be slightly adherent. Waterproof but still breathable – water cannot go through and underlying moisture does not get trapped.Protects – against scratches and other damageAnti-skid – mat cannot slip – no need for any tape at the sidesVery strong material – does not tearReusable – can be used several timesInstalation Instructions•• Turn-off floor heating before laying •• The rolls should be laid down with an overlapping on each side by about 10 cm (4 inches) •• Protect against direct solar radiation •• The areas to be covered must be dry underneath the breathable surface protective roll. •• The floor protective film cannot endure a permanent pressure of more than 100 kg/m² for more than 24 hours •• Waiting period for laying: •• Follow the manufacturer‘s guidelines for complete curing times. Due to variable site conditions, a site test should also be done to ensure floor is cured. •• Never use the mat earlier than 72 h after the final coat has been applied. •• Room temperature 10° – 25°C •• Allowable room humidity 50 % – 60 %All the details included in this technical product information are based on our best knowledge and experiences. They do not represent a guarantee of certain properties. It is the responsibility of the processor to determine the suitability for a particular purpose through his own tests and trials. Should the adherent underside remain on the floor, we disclaim liability.Installation and Product DataIMPORTANTThe areas to be covered must not release any solvent vapors. No solvent vapors may be present on top of the areas to be covered. albert Bauprodukte can not ensure that the product can be used as suggested. Should the adherent underside remain on the floor, albert Bauprodukte disclaims liability. Do not use on newly laid porous stone floors or earthenware slab. In the rare case of a residue remaining on the surface after albert floorotex has been laid, simply remove the residue by gently wiping it away with a wet (use lukewarm water) kitchen cloth or rag, and if necessary, a small amount of hand soap. albert floorotex is slightly adherent on the bottom. To avoid accidents the joints of the mat have to be taped down.
Price: 104.99 USD
Location: Brandon, South Dakota
End Time: 2024-07-27T21:59:18.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Floorotex
Type: Floor Protection