Description: 10 horse power K241 kohler with standard piston, rings and gaskets with seals as shown in the picture The suffix does not matter. EXAMPLE: K241 is the same as a K241s and so on also M10 series If you are buying over size piston the machine shop must have the piston before they can bore the cylinder. If they try and bore your cylinder before they have your new piston, GO to a different machine shop because they do not know what they are doing. 1. Take block to machine shop so they can measure the cylinder and they will tell you what size to purchase. 2. Order your NEW piston and take it to the machine shop. 3. The machine shop measures the NEW piston and add in the tolerances then bores the cylinder according to the piston size. This is how it is done and you have to make sure it is done this way if you want it to be correct and last for years and years to come. They have gone on mowers and pulling tractors all over the world! This is for all the K241engines All Parts are HIGH QUALITY PARTS, as PURCHASED THRU STENS/ROTARY KIT INCLUDES THE FOLLOWING: 1- New Piston: ***PISTON COMES IN: standard in this auction, I do also have 010, 020 and 030 in my auctions Piston Rings. Wrist pin and Keepers. Complete Gasket Set. Engine Seals. FREE!! I also give you the torque specs with your purchase (Head 25-30 ft lb and rod 260-inch lb for the 10, 12 and 14 hp engine) The 8 hp is HEAD AT 15-20 FT LBS, rod at 140 inch lb FREE!! instructions on how to properly install your connecting rod.(The oil hole on the rod goes towards the cam) *The most common reason for premature engine failure on your rebuilt engine is an improper rod installation. In my other auctions, I also offer high Quality, cost saving tools and other COMPLETE Engine Rebuild, Refresh Engine Rebuild Kits to rebuild your own engine, so please check out my other auctions for tools, lawn, tractor seats and other rebuild kits. Offer reduced shipping on multiple item purchases. Crank bearings are around $51.00 for two -AVAILABLE IN MY STORE Valve guides are around $19.50 extra. Points plunger or also called points pin is around $19.99 (Kohler OEM) Governor gear (kohler OEM) is around $42.99 Standard rod or .010 is $29.99 .020 connecting rod is around $38.00 (cheaper than a new crank shaft) available in my store Thanks for Looking! ***Copyright infringements now invoke liquidated damages of $1000.00 per instance.
Price: 84.99 USD
Location: Wauseon, Ohio
End Time: 2024-10-08T18:34:11.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Horsepower: 10 HP
Model: K241
Type: Engine
MPN: Does Not Apply
Product Type: Engine rebuild
Lawn Mower Type: Lawn Mower Parts & Accessories
Power: Gas
Brand: for Kohler
