Firestone Rubbergard Eco White QuickSeam Pipe Flashing / Pipe Boot

Description: Firestone QuickSeam Pipe Flashing DESCRIPTION: Firestone QuickSeam Pipe Flashings are specifically designed to be used in approved Firestone membrane applications for flashing of round penetrations. The pipe flashing contains universal stainless steel worm gear clamps. Property Minimum Performance QuickSeam Tape Base: Rubber Polymer Color: Eco White Solvents: None Solids: 100% Cured State: Cured Thickness: 0.762 mm +/- 0.13 mm (0.030” +/- 0.005”) Molded Pipe Flashing Base: Molded EPDM Color: Eco White Sizes: Fits 25.4 mm - 174.6 mm (1.0" - 6.875") O.D. Clamp: Stainless Steel - clamps are included Pipe Flange: 330.2 mm (13.0") O.D. Thickness: 1.4 mm - 1.9 mm (0.055" - 0.075") Fits the Pipe Outside Diameters listed below: SI Eng 25.4 mm - 34.9 mm 1.0" - 1.375" 41.3 mm - 47.6 mm 1.625" - 1.875" 50.8 mm - 66.7 mm 2.0" - 2.625" 69.8 mm - 92.1 mm 2.75" - 3.625" 102.0 mm - 114.0 mm 4.0" - 4.50" 127.0 mm - 141.0 mm 5.0" - 5.50" 152.4 mm - 174.6 mm 6.0" - 6.875" METHOD OF APPLICATION: Penetration must be clean of prior flashing and foreign materials. Cut along the top edge of the ring on the QuickSeam Pipe Flashing corresponding to one size smaller than the pipe you are flashing. Clean the membrane to receive the QuickSeam Pipe Flashing using QuickPrime Plus and a QuickScrubber or QuickScrubber Plus pad and handle to remove all dusting agent, dirt and other contaminants that will affect the finished bond. Allow to dry according to the touch-push test. Remove the release paper. Install the pipe flashing and roll the flange with a silicone hand roller. Install clamping ring and lap sealant per Firestone Specialty Products specifications and details. SHELF LIFE: 1. Shelf life of one (1) year can be expected if stored in original unopened container at temperatures between 15.6 - 26.7° C (60 - 80° F). 2. Shelf life will be shortened if exposed to elevated temperatures. 3. Rotate stock to insure stored material will not go beyond the shelf life of one (1) year. STORAGE: 1. Store in original unopened containers at temperatures between 15.6 - 26.7° C (60 - 80° F) until ready for use. 2. When exposed to lower temperatures, restore to room temperature prior to use. 3. Keep the material out of direct sunlight until ready for application. PRECAUTIONARY DATA: 1. Review Material Safety Data Sheet (MSDS) prior to use. 2. Do not install over uneven substrates.

Price: 45 USD

Location: El Dorado Springs, Missouri

End Time: 2024-12-20T01:28:58.000Z

Shipping Cost: 0 USD