Fireplace Firebox Burner Bio Ethanol Insert Biofuels

Description: Country of production and shipment - Ukraine. Combustion chamber "Victory" Grand" The combustion chamber "Victory" Grand" is intended for use as a separate unit or for bio fireplaces. You are buying only a Stainless Steel Ethanol Fireplace Insert. Photo ”with a burning fire in the fireplace” shows one possible application The combustion chamber "Victory" Grand". Especially: • Now you have two independent shutters to control the fire. You can have a fire just to the right or only on the left or the entire length of the burner. And more or less closing the shutter to control the power and the height of the fire. • Divider fire - a special chamber design allows the fire to burn uniformly throughout its length. • Cover allows to adjust the height of the fire. • Material - Stainless steel - 2,0 mm or 5,66 points thick. • Total - 3,8 liters of biofuel. • Maximum filling of fuel is recommended for no more than - 3200 ml. • Biofuel consumption of 800 ml / hour - at the maximum level of fire - if you open both covers. • Biofuel consumption of 400 ml / hour - at the maximum level of fire - if you open one of the covers. • Environmentally Friendly • As Safe as a Candle • No Smell or Fumes • Minimal Installation No Venting, Gas or Electrical Lines needed • Just install, fill with ethanol and light it up, and there you go a wonderful fire. • Used: Biofuels, bioethanol, ethanol. Dimensions: • Tank (Length x Height x Width): 96 cm x 4,7 cm x 8,5 cm or 37,80 inch х 1,85 inch х 3,35 inch • The tank lid (Length x Width): 100 cm x 11,5 cm or 39,37 inch x 4,53 inch The device for ignition of fire A device for ignition and flame control in Biofireplaces.Made of stainless steel. Length 22 cm or 8,67 inch Application:1. Pour into a container for bio-fuel combustion 2. Lower the tip of the device for the ignition and wet in the tank for combustion 3. Set fire to the tip of the device for combustion 4. Set fire to the tip of the device for burning tank with biofuelInformation that tells you about me as a manufacturer of burnersThis letter is from a buyer who bought Combustion chamber "Victory" Medium ", left to me positive feedback and just wrote me a letter. Thank you, I was very pleased. Sent Date: 17-Aug-12 04:51:43 AEST Dear allmechanicalparts, Howdy! Thanks for the feedback. FYI, I did a burn test the other night in our fireplace with it. I only put in 1L of Denatured Alcohol into the reservoir to check how the denatured alcohol would burn in it (flame height and color) and for how long. I was very pleasantly surprised to get 2hrs. & 20 min. from it. This means a 1.3L fill as indicated by your directions of maximum fill will get right around a 3-hr. burn, that's a very efficient design you have, that is awesome! Love the unit very much. The green label one produces a nice golden flame, the blue label does not, the blue container only produces a blue flame which isn't as natural and attractive. Being that this product is at any local hardware store, these fireplaces will really start to take off! :) Now I can build my tabletop fireplace now that I have the key element. Thanks much! Gary Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser.

Price: 265 USD

Location: Kiev

End Time: 2024-04-22T18:05:56.000Z

Shipping Cost: 95 USD