London Jeans

Fender J-Bass Harness Upgrade! Bourns, Mojo Tone, & Orange Drop Cap!

Description: STARR GUITAR SYSTEMS for Fender Jazz-Bass. This system is a great deal if you want to improve your J-Bass and still save some money! The BOURNS mini pots are a bit less money then their larger brothers, but still sound great! And, you also get the Mojo Tone input jack, Orange Drop .047 capacitor, and vintage cloth wire! FREE SHIPPING IN THE USA! Great for many older import basses that have narrow/tighter control cavities that won't fit full size pots Premium replacement electronics for your Fender J-Bass! Each set is assembled, hand wired and soldered in the USA by Dave Starr using premium parts. Upgrade your import bass electronics, or replace your old worn out parts with these premium replacement units! Simply attach your pickup wires, and bridge ground wire and you are ready to rock! All sets are signed by Dave Starr and have their own serial number. Included in each JBbm set: 3) 250K BOURNS Mini Pots, Audio Taper, 24 spline split shaft, with hardware 1) Sprague "Orange Drop" .047 mfd 100 volt Capacitor 4) Vintage style push back black (ground) and white (hot) cloth covered wires, 22 gauge, with a waxed braided cotton outer insulation. 1) Mojo Tone input jack with heat shrink strain relief on both terminals. 1) Wiring diagram (see photos above) 1) Assembly template board Check my other listings for more great deals on guitar and bass harness systems!! Note: Most guitars manufactured overseas in South Korea, Japan, China, Indonesia and Mexico use 6mm metric pots and have metric sized holes drilled. You will need to enlarge the pot holes to 3/8" to fit these pots properly. Starr Guitar Systems PO Box 3132 Conroe, Texas 77305 WHO WE ARE: Starr Guitar Systems (SGS) owner Dave Starr has been playing guitar and bass professionally (WildeStarr, Vicious Rumors, and CHASTAIN) for over 30 years, and doing guitar repair for over 30 years as well. Dave has put his years of experience as a pro to come up with his own line of guitar & bass electronic upgrade systems. So, when you buy from Dave, you are not just buying gear from a guitar technician... you are buying gear from a PRO MUSICIAN who has been there and done that..... recorded over 15 albums, toured the world multiple times, MTV videos, artist endorsements (currently signed with ERNIE BALL strings and EMG pickups), etc. Every SGS unit comes with all of that experience behind it... what works and what doesn't, because Dave has pretty much seen and done it all. And, every SGS unit is custom built and assembled by hand one at a time by Dave here in his Houston Texas shop. www.wildestarr.comwww.facebook.com/DaveStarr7777www.facebook.com/starrguitarsystemswww.ernieball.com/artists/dave-starrwww.emgpickups.com/artist/index/view/id/407

Price: 39.85 USD

Location: Conroe, Texas

End Time: 2024-07-20T18:04:42.000Z

Shipping Cost: 0 USD

Product Images

Fender J-Bass Harness Upgrade! Bourns, Mojo Tone, & Orange Drop Cap!Fender J-Bass Harness Upgrade! Bourns, Mojo Tone, & Orange Drop Cap!

Item Specifics

All returns accepted: ReturnsNotAccepted

To Fit: Bass Guitar

Country/Region of Manufacture: United States

Position: complete system

Model: JBM

To Fit Guitar: Bass Guitar

Type: Jazz bass wiring harness

Color: Silver

MPN: Does Not Apply

Brand: SGS

Recommended

☀️SGS USA 1/4" Dia Solid Carbide Square End Mill, 2 Flute, 3/4 LOC 2-1/2 OAL
☀️SGS USA 1/4" Dia Solid Carbide Square End Mill, 2 Flute, 3/4 LOC 2-1/2 OAL

$15.09

View Details
Kyocera SGS 1/2" x 1/2 x 1-1/4 x 3 SQ Solid Carbide End Mill 32664 V-CARB 5 FL
Kyocera SGS 1/2" x 1/2 x 1-1/4 x 3 SQ Solid Carbide End Mill 32664 V-CARB 5 FL

$38.95

View Details
SGS 30176 SER 1B 1" Solid Carbide End Mill , Made in USA
SGS 30176 SER 1B 1" Solid Carbide End Mill , Made in USA

$289.93

View Details
SGS SA-1L Carbide Double Cut Cylinder Burr 1/4" Diameter 1/4" Shank USA Made
SGS SA-1L Carbide Double Cut Cylinder Burr 1/4" Diameter 1/4" Shank USA Made

$15.99

View Details
1 NEW FALCON / SGS 1/4" SHANK CARBIDE BURR. SC-5. DOUBLE CUT. END CUT (S414)
1 NEW FALCON / SGS 1/4" SHANK CARBIDE BURR. SC-5. DOUBLE CUT. END CUT (S414)

$10.95

View Details
1/8" (.125") SPOT DRILL 130 DEGREE CARBIDE KYOCERA SGS 07031
1/8" (.125") SPOT DRILL 130 DEGREE CARBIDE KYOCERA SGS 07031

$9.50

View Details
Shimano Deore RD-M5120-SGS 10 or 11-Speed MTB Rear Derailleur
Shimano Deore RD-M5120-SGS 10 or 11-Speed MTB Rear Derailleur

$24.99

View Details
SGS Carbide Ball Burr 1/4" x 1/8" Shank SD-51 F/C - 5 PCS
SGS Carbide Ball Burr 1/4" x 1/8" Shank SD-51 F/C - 5 PCS

$28.50

View Details
SGS Pro ⅜" Carbide Burr 12½" OAL Radius Extended Reach Machinist End Mill
SGS Pro ⅜" Carbide Burr 12½" OAL Radius Extended Reach Machinist End Mill

$24.95

View Details
Kyocera SGS 1/2" x 1/2" x 1-1/4" x 3" SQ Solid Carbide End Mill 32664 (Lot of 5)
Kyocera SGS 1/2" x 1/2" x 1-1/4" x 3" SQ Solid Carbide End Mill 32664 (Lot of 5)

$179.95

View Details