Extreme Networks 17103 Summit X670-48X 48 Port 10G SFP+ Switch 2x 550w PSU NEW

Description: Selling an Extreme Networks 17103 X670-48X 48 port SFP+ switch is new with the bag. It was obtained as a cold spare. This switch was opened only to verify no damage occurred during shipping or transport. It is capable of 48 SFP+ 10G connections. This comes with all three fans (front-to-back airflow), rack ears, and dual 550W PSU (10925). From Extreme Networks website: Summit X670-48x Switch Ports and SlotsThe front panel of the Summit X670-48x switch includes:Forty-eight unpopulated optical ports that can accommodate 10GBASE-X SFP+ or 1000BASE-X SFP optical modules to provide high-density fiber connectivity. For information about SFP+ and SFP optical modules, see the Extreme Networks Pluggable Transceivers Installation Guide.10/100/1000-Mbps management port.Serial console port used to connect a terminal and perform local management.USB port for access to external storage.Motion sensor.Grounding stud.LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their operation, see Summit X670 Series Switch LEDs.Stack number indicator.Summit X670-48x Front PanelThe rear panel of the Summit X670-48x switch (Summit X670-48x Rear Panel) includes:Three replaceable fan modules.Two power supply bays for either AC or DC power supplies (see Summit 450 W AC and DC Power Supplies and Summit 550 W AC and DC Power Supplies).Summit X670-48x Rear Panel Summit X670 Series SwitchesThe Summit X670 series switches have 48 front-panel Ethernet ports that can provide 10-gigabit Ethernet connectivity using copper ports or installable SFP+ optical modules.The Summit X670 series switches have 48 front-panel Ethernet ports that provide 10-gigabit Ethernet connectivity using installable SFP+ optical modules. The Summit X670 series switches include the following base models:Summit X670-48x Switch Ports and SlotsSummit X670V-48x Switch Ports and SlotsSummit X670V-48t Switch Ports and SlotsThe minimum required ExtremeXOS version for Summit X670 series switches varies by model. (See the Extreme Hardware/Software Compatibility and Recommendation Matrices for details.) The ExtremeXOS version cannot be greater than 16.x.Each base model is available with either front-to-back or back-to-front cooling. There is no operational difference between these switch versions.The Summit X670-48x and Summit 670V-48x have SFP+ ports support dual interface speeds of Gigabit Ethernet and 10-Gigabit Ethernet. SFP+ ports can accept both gigabit SFP and 10 gigabit SFP, and depending upon the pluggable optics you choose, SFP+ modules can work in both modes.The Summit X670V-48t has 10G BASE-T copper ports. The switch also has fiber combination ports that support dual interface speeds of Gigabit Ethernet and 10-Gigabit Ethernet.A serial console port on the front panel of the Summit X670 series switch allows you to connect a terminal and perform local management. An Ethernet management port can be used to connect the system to a parallel management network for administration. Alternatively, you can use an Ethernet cable to connect this port directly to a laptop to view and locally manage the switch configuration. The Ethernet management port supports 10/100/1000 Mbps speeds.The X670-48x and X670V-48x models are equipped with a motion sensor. A motion sensor on the front of the switch allows you to control the power to the port LEDs. When the motion sensor is enabled, the port LEDs are turned off if motion is not detected during a specified amount of time. When motion is detected, the port LEDs are turned back on. You can adjust how long the LEDs stay lit after motion is detected. When the motion sensor is disabled, the port LEDs are always on.NOTEThe X670V-48t switch does not have a motion sensor.The rear panel of the Summit X670V-48t and the X670V-48x switches provides a slot for an option card called a versatile interface module or VIM. The VIM4-40G4X (Part No. 17122) module adds four QSFP+-based 40-Gbps ports to the Summit X670V series switches.NOTEOnly VIM4 modules are compatible with the Summit X670 series switches. Other VIM types that may appear to be mechanically compatible with the Summit X670 series switches will not function if they are installed in these switches.Switch cooling is provided by three replaceable fan modules. Fan modules are available in two different models that direct the airflow either from front to back or from back to front. All five installed fan modules must be of the same model, so that they all direct the airflow in the same direction.NOTEEnsure that all fan module slots are filled when the switch is powered on. Fan modules can be hot-swapped after power has been turned on.Two power supply bays accommodate either AC or DC power supplies. Power supplies have integrated cooling fans that operate independently of the switch fans. Like the fan modules, the power supplies are available in models with either front-to-back or back-to-front cooling airflow.NOTEAir must flow in the same direction for all installed fan modules and power supplies in a switch.

Price: 779 USD

Location: Elk River, Minnesota

End Time: 2024-11-19T00:35:41.000Z

Shipping Cost: 0 USD